CY8C5267LTI-LP089中文资料赛普拉斯数据手册PDF规格书

General Description

PSoC® 5LP is a true programmable embedded system-on-chip, integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The PSoC 5LP architecture boosts performance through:

■ 32-bit ARM Cortex-M3 core plus DMA controller at up to 80 MHz

■ Ultra low power with industry’s widest voltage range

■ Programmable digital and analog peripherals enable custom functions

■ Flexible routing of any analog or digital peripheral function to any pin

PSoC devices employ a highly configurable system-on-chip architecture for embedded control design. They integrate configurable analog and digital circuits, controlled by an on-chip microcontroller. A single PSoC device can integrate as many as 100 digital and analog peripheral functions, reducing design time, board space, power consumption, and system cost while improving system quality.

特性 Features

■ Operating characteristics

□ Voltage range: 1.71 to 5.5 V, up to 6 power domains

□ Temperature range (ambient) –40 to 85 °C[1]

□ DC to 80-MHz operation

□ Power modes

• Active mode 3.1 mA at 6 MHz, and 15.4 mA at 48 MHz

• 2-µA sleep mode

• 300-nA hibernate mode with RAM retention

□ Boost regulator from 0.5-V input up to 5-V output

■ Performance

□ 32-bit ARM Cortex-M3 CPU, 32 interrupt inputs

□ 24-channel direct memory access (DMA) controller

■ Memories

□ Up to 256 KB program flash, with cache and security features

□ Up to 32 KB additional flash for error correcting code (ECC)

□ Up to 64 KB RAM

□ 2 KB EEPROM

■ Digital peripherals

□ Four 16-bit timer, counter, and PWM (TCPWM) blocks

□ I2C, 1 Mbps bus speed

□ USB 2.0 certified Full-Speed (FS) 12 Mbps peripheral interface (TID#10840032) using internal oscillator[2]

□ 20 to 24 universal digital blocks (UDB), programmable to create any number of functions:

• 8-, 16-, 24-, and 32-bit timers, counters, and PWMs

• I2C, UART, SPI, I2S, LIN 2.0 interfaces

• Cyclic redundancy check (CRC)

• Pseudo random sequence (PRS) generators

• Quadrature decoders

• Gate-level logic functions

■ Programmable clocking

□ 3- to 74-MHz internal oscillator, 2 accuracy at 3 MHz

□ 4- to 25-MHz external crystal oscillator

□ Internal PLL clock generation up to 80 MHz

□ Low-power internal oscillator at 1, 33, and 100 kHz

□ 32.768-kHz external watch crystal oscillator

□ 12 clock dividers routable to any peripheral or I/O

■ Analog peripherals

□ 12-bit SAR ADC

□ 8-bit DAC

□ Two comparators

□ CapSense® support, up to 62 sensors

□ 1.024 V ±1 internal voltage reference

■ Versatile I/O system

□ 46 to 72 I/O pins – up to 62 general-purpose I/Os (GPIOs)

□ Up to eight performance I/O (SIO) pins

• 25 mA current sink

• Programmable input threshold and output high voltages

• Can act as a general-purpose comparator

• Hot swap capability and overvoltage tolerance

□ Two USBIO pins that can be used as GPIOs

□ Route any digital or analog peripheral to any GPIO

□ LCD direct drive from any GPIO, up to 46 × 16 segments

□ CapSense support from any GPIO

□ 1.2-V to 5.5-V interface voltages, up to four power domains

■ Programming, debug, and trace

□ JTAG (4-wire), serial wire debug (SWD) (2-wire), single wire viewer (SWV), and Traceport (5-wire) interfaces

□ ARM debug and trace modules embedded in the CPU core

□ Bootloader programming through I2C, SPI, UART, USB, and other interfaces

■ Package options: 68-pin QFN,100-pin TQFP, and 99-pin CSP

■ Development support with free PSoC Creator™ tool

□ Schematic and firmware design support

□ Over 100 PSoC Components™ integrate multiple ICs and system interfaces into one PSoC. Components are free embedded ICs represented by icons. Drag and drop component icons to design systems in PSoC Creator.

□ Includes free GCC compiler, supports Keil/ARM MDK compiler

□ Supports device programming and debugging