CY8C3666AXC-LP中文资料英飞凌数据手册PDF规格书

General Description

PSoC® 5LP is a true programmable embedded system-on-chip, integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The PSoC 5LP architecture boosts performance through:

 32-bit Arm Cortex-M3 core plus DMA controller and digital filter processor, at up to 80 MHz

 Ultra low power with industry's widest voltage range

 Programmable digital and analog peripherals enable custom functions

 Flexible routing of any analog or digital peripheral function to any pin

PSoC devices employ a highly configurable system-on-chip architecture for embedded control design. They integrate configurable analog and digital circuits, controlled by an on-chip microcontroller. A single PSoC device can integrate as many as 100 digital and analog peripheral functions, reducing design time, board space, power consumption, and system cost while improving system quality.

特性 Features

 Operating characteristics

 Voltage range: 1.71 to 5.5 V, up to 6 power domains

 Temperature range (ambient): –40 to 85 °C Extended temperature parts: –40 to 105 °C

 DC to 80-MHz operation

 Power modes

• Active mode 3.1 mA at 6 MHz, and 15.4 mA at 48 MHz

• 2-μA sleep mode

• 300-nA hibernate mode with RAM retention

 Boost regulator from 0.5-V input up to 5-V output

 Performance

 32-bit Arm Cortex-M3 CPU, 32 interrupt inputs

 24-channel direct memory access (DMA) controller

 24-bit 64-tap fixed-point digital filter processor (DFB)

 Memories

 Up to 256 KB program flash, with cache and security features

 Up to 32 KB additional flash for error correcting code (ECC)

 Up to 64 KB RAM

 2 KB EEPROM

 Digital peripherals

 Four 16-bit timer, counter, and PWM (TCPWM) blocks

 I2C, 1 Mbps bus speed

 USB 2.0 certified Full-Speed (FS) 12 Mbps peripheral interface (TID#10840032) using internal oscillator

 Full CAN 2.0b, 16 Rx, 8 Tx buffers

 20 to 24 universal digital blocks (UDB), programmable to create any number of functions:

• 8-, 16-, 24-, and 32-bit timers, counters, and PWMs

• I2C, UART, SPI, I2S, LIN 2.0 interfaces

• Cyclic redundancy check (CRC)

• Pseudo random sequence (PRS) generators

• Quadrature decoders

• Gate-level logic functions

 Programmable clocking

 3- to 74-MHz internal oscillator, 1% accuracy at 3 MHz

 4- to 25-MHz external crystal oscillator

 Internal PLL clock generation up to 80 MHz

 Low-power internal oscillator at 1, 33, and 100 kHz

 32.768-kHz external watch crystal oscillator

 12 clock dividers routable to any peripheral or I/O

 Analog peripherals

 Configurable 8- to 20-bit delta-sigma ADC

 Up to two 12-bit SAR ADCs

 Four 8-bit DACs

 Four comparators

 Four opamps

 Four programmable analog blocks, to create:

• Programmable gain amplifier (PGA)

• Transimpedance amplifier (TIA)

• Mixer

• Sample and hold circuit

 CapSense® support, up to 62 sensors

 1.024 V ±0.1% internal voltage reference

 Versatile I/O system

 46 to 72 I/O pins – up to 62 general-purpose I/Os (GPIOs)

 Up to eight performance I/O (SIO) pins

• 25 mA current sink

• Programmable input threshold and output high voltages

• Can act as a general-purpose comparator

• Hot swap capability and overvoltage tolerance

 Two USBIO pins that can be used as GPIOs

 Route any digital or analog peripheral to any GPIO

 LCD direct drive from any GPIO, up to 46 × 16 segments

 CapSense support from any GPIO

 1.2-V to 5.5-V interface voltages, up to four power domains

 Programming, debug, and trace

 JTAG (4-wire), serial wire debug (SWD) (2-wire), single wire viewer (SWV), and Traceport (5-wire) interfaces

 Arm debug and trace modules embedded in the CPU core

 Bootloader programming through I2C, SPI, UART, USB, and other interfaces

 Package options: 68-pin QFN, 100-pin TQFP, and 99-pin CSP

 Development support with free PSoC Creator™ tool

 Schematic and firmware design support

 Over 100 PSoC Components™ integrate multiple ICs and system interfaces into one PSoC. Components are free embedded ICs represented by icons. Drag and drop component icons to design systems in PSoC Creator.

 Includes free GCC compiler, supports Keil/Arm MDK compiler

 Supports device programming and debugging