High Isolation Absorptive SPDT Switch MMIC with Integrated Control Logic

Description The CXG1039TN is a high isolation absorptive SPDT (Single Pole Dual Throw) switch MMIC used in PCS handsets. This IC is designed using the Sony’s GaAs J-FET process and operates with CMOS input. Features • Absorptive type • CMOS input control • Low insertion loss 0.8 dB (Typ.) at

文件：57.96 Kbytes 页数：5 Pages

SONYSony Corporation

索尼

High Isolation DPDT Switch

Description The CXG1040TN is a DPDT (Dual Pole Dual Throw) antenna switch MMIC used in Personal Communication handsets such as PCS. This IC is designed using the Sony’s GaAs J-FET process and operates with CMOS input. Features • CMOS input control • Insertion loss 0.5 dB (Typ.) at 2.0 GHz •

文件：58.82 Kbytes 页数：5 Pages

SONYSony Corporation

索尼

GSM900/1800/1900 SPDT TX/RX Switch

Description The CXG1028ATN is a high power SPDT switch suitable for Digital Cellular applications. This device is part of a growing family of MMIC Antenna switches for digital cellular and cordless radios. It uses the state-of-the-art Sony GaAs JFET process. Features • Positive voltage

文件：81.85 Kbytes 页数：7 Pages

SONYSony Corporation

索尼

Dual-Band 3V Power Amplifier for GSM900/DCS1800 Applications

Description The CXG1047FN dual band GaAs PA is a 3-stage power amplifier that may be used for both GSM900 and DCS1800 applications. To achieve minimum die-size and package dimensions, it contains one amplifier chain with a single input and output. The PA has a single RF input for both the GSM900

文件：104.18 Kbytes 页数：9 Pages

SONYSony Corporation

索尼

Receiving Dual-Band Mixer

Description The CXG1050TN is a receiving dual-band mixer MMIC. This IC is designed using the Sonys GaAs JFET process. Features • High conversion gain Gc = 9.5dB (Typ.) • Low noise figure NF = 4.9 to 5.2dB (Typ.) • Low distortion Input IP3 = –0.5 to 0dBm (Typ.) • Single 2.7V power suppl

文件：114 Kbytes 页数：8 Pages

SONYSony Corporation

索尼

Power Amplifier/Antenna Switch Low Noise Amplifier/Down Conversion Mixer for PHS

Description The CXG1053FN is an MMIC consisting of the power amplifier, antenna switch, low noise amplifier and down conversion mixer. This IC is designed using the Sonys GaAs J-FET process featuring a single positive power supply operation. Features • Operates at a single positive power suppl

文件：133.38 Kbytes 页数：8 Pages

SONYSony Corporation

索尼

High-Frequency SPDT Antenna Switch

Description The CXG1060N is a high power antenna switch MMIC to connect TX/RX to one of 4 antennas. This IC is designed using the Sony’s GaAs J-FET process and operates at a single positive power supply. Features • Single positive power supply operation • Low insertion loss 0.4 dB (Typ.) at 1.

文件：94.56 Kbytes 页数：6 Pages

SONYSony Corporation

索尼

Low Noise Down Conversion Mixer for PHS

Description The CXG1061TN is a low noise down conversion mixer MMIC for PHS. This IC is designed using the Sony’s GaAs J-FET process. Features • High gain Gc=22 dB (Typ.) • Low distortion Input IP3=–13 dBm (Typ.) • Low LO input power operation PLO=–15 dBm • High image suppression ratio IMR=2

文件：88.38 Kbytes 页数：5 Pages

SONYSony Corporation

索尼

High Power 2 쨈 4 Antenna Switch MMIC with Integrated Control Logic

Description The CXG1064ATN is a high power antenna switch MMIC. The CXG1064ATN is suited to connect Tx/Rx to one of 4 antennas in cellular handset such as PDC. The CXG1064ATN has the integrated control logic and can be operated with CMOS input. This IC is designed using the Sony’s GaAs J-FET pr

文件：94.23 Kbytes 页数：8 Pages

SONYSony Corporation

索尼

SP4T Antenna Switch for GSM Dual band

Description The CXG1068N is a high power antenna switch MMIC for use in Dualband GSM handsets. One antenna can be routed to either of the 2Tx or 2Rx ports. This IC is designed using the Sony’s GaAs J-FET process which enable the CXG1068N to be operated with low voltage. Features • Low control

文件：93.27 Kbytes 页数：6 Pages

SONYSony Corporation

索尼