Sync Identification for CRT Display

Description The CXA2016S is used for sync signal identification and waveform shaping in the CRT computers display for multi-scan system. There are three types of sync input signals for identification: separate sync, composite sync, and sync on video signals. Features • Po

文件：183.52 Kbytes 页数：12 Pages

SonySony Corporation

索尼

Sync Identification for CRT Display

Description\nThe CXA2016S is used for sync signal\nidentification and waveform shaping in the CRT\ncomputers display for multi-scan system. There are\nthree types of sync input signals for identification:\nseparate sync, composite sync, and sync on video\nsignals. • Power save function available (5 V power supply)\n• Clamp pulse output position selectable among sync interval, back porch interval, and AUTO.\n• Polarity information of sync signals is output.\n• Polarity and amplitude of input signals:\n                      Polarity               Amplitude (Vp-;

Sony

索尼

Surface Mount Zener Diode

Voltage: 11 - 100 Volts Power: 2.0 Watt Features - For surf ace mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Excellent clamping capability - Typical I less than 1uA above 11V D - High te

文件：97.36 Kbytes 页数：5 Pages

COMCHIP

典琦

ROHS COMPLIANT METAL GATE RF SILICON FET

文件：32.9 Kbytes 页数：2 Pages

SEME-LAB

High-Bandwidth, Low Voltage, Dual SPDT Analog Switch

DESCRIPTION The DG2016/DG2026 are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage, high bandwidth applications. The DG2016/DG2026’s on-resistance (3 Ω at 2.7 V), matching and flatness are guaranteed over the entire analog voltag

文件：62.5 Kbytes 页数：6 Pages

VishayVishay Siliconix

威世威世科技公司