CS8361YDPSR7G中文资料安森美半导体数据手册PDF规格书

The CS8361 is a precision Micropower dual voltage regulator with ENABLE and RESET.

The 5.0 V standby output is accurate within ±2 while supplying loads of 100 mA and has a typical dropout voltage of 400 mV. Quiescent current is low, typically 140 μA with a 300 μA load. The active RESET output monitors the 5.0 V standby output and is low during power−up and regulator dropout conditions. The RESET circuit includes hysteresis and is guaranteed to operate correctly with 1.0 V on the standby output.

The second output tracks the 5.0 V standby output through an external adjust lead, and can supply loads of 250 mA with a typical dropout voltage of 400 mV. The logic level ENABLE lead is used to control this tracking regulator output.

Both outputs are protected against overvoltage, short circuit, reverse battery and overtemperature conditions. The robustness and low quiescent current of the CS8361 makes it not only well suited for automotive microprocessor applications, but for any battery powered microprocessor applications.

特性 Features

• 2 Regulated Outputs

− Standby Output 5.0 V ± 2; 100 mA

− Tracking Output 5.0 V; 250 mA

• Low Dropout Voltage (0.4 V at Rated Current)

• RESET Option

• ENABLE Option

• Low Quiescent Current

• Protection Features

− Independent Thermal Shutdown

− Short Circuit

− 60 V Load Dump

− Reverse Battery

• Internally Fused Leads in SO−16L Package

• These are Pb−Free Devices