CPC7591MATR中文资料CLARE数据手册PDF规格书

描述 Description

The CPC7591 is a member of Clare’s next generation Line Card Access Switch (LCAS) family. This monolithic 4-pole solid state switch is available in either a 16-pin SOIC or a 16-pin DFN package. It provides the necessary functions to replace the 2-Form-C electromechanical ringing relay and it’s associated snubber circuitry on traditional analog line cards or contemporary integrated voice and data (IVD) line cards found in Central Office (CO), Access, and PBX equipment. Because this device contains solid state switches for tip and ring line break and for ringing injection/return, it requires only a +5 V supply for operation and TTL logic-level inputs for control. The CPC7591 provides stable start-up conditioning during system power up and for hot plug insertion applications. Once active, the inputs respond to traditional TTL logic levels, enabling the CPC7591 to be used with 3.3V-only logic.

特性 Features

• TTL logic level inputs for 3.3V logic interfaces

• Smart logic for power up / hot plug state control

• Improved switch dv/dt immunity of 500 V/μs

• Small 16-pin SOIC or 16-pin DFN package

• DFN package printed-circuit board footprint is 60 percent smaller than the SOIC version, 40 percent smaller than fourth generation EMR solutions.

• Monolithic IC reliability

• Low, matched RON

• Eliminates the need for zero-cross switching

• Flexible switch timing for transition from ringing mode to idle/talk mode.

• Clean, bounce-free switching

• Tertiary protection consisting of integrated current limiting, voltage clamping, and thermal shutdown for SLIC protection

• 5 V operation with power consumption < 10 mW

• Intelligent battery monitor

• Latched logic-level inputs, no external drive circuitry

Applications

• VoIP Gateways

• Central office (CO)

• Digital Loop Carrier (DLC)

• PBX Systems

• Digitally Added Main Line (DAML)

• Hybrid Fiber Coax (HFC)

• Fiber in the Loop (FITL)

• Pair Gain System

• Channel Banks