CMD233

2-20 GHz (C, X, Ku, K Band) Broad Range Distributed Amplifier MMIC; • Low noise figure\n• Single positive supply voltage\n• Small die size\n• Wide bandwidth\n• Positive bias\n;

Qorvo's CMD233 is a wideband RF / Microwave GaAs MMIC distributed low noise amplifier ideally suited for military, space, and communications systems where small size and low noise figure are needed over a wide bandwidth. At 10 GHz the device delivers greater than 9 dB of gain with a corresponding noise figure of 4.5 dB and an output 1 dB compression point of +20.5 dBm. The CMD233 LNA is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching. The CMD233 amplifier MMIC also offers full passivation for increased reliability and moisture protection.\n

CMD233

2-20 GHz Distributed Low Noise Amplifier

CMD233

2-20 GHz Distributed Low Noise Amplifier

CMD233C4

2-20 GHz (C, X, Ku Band) Distributed Low Noise Amplifier MMIC; • Low noise figure\n• Pb-free RoHS compliant 4x4 QFN package\n• Single positive supply voltage\n• Wide bandwidth\n• Positive bias\n;

Qorvo's CMD233C4 is a wideband GaAs MMIC low noise amplifier housed in a leadless 4x4 mm surface mount package. The CMD233C4 is ideally suited for military, space, and communications systems where small size and low noise figure are needed over a wide bandwidth. At 10 GHz this amplifier delivers greater than 9 dB of gain with a corresponding noise figure of 4.5 dB and an output 1 dB compression point of +20.5 dBm. The CMD233C4 MMIC is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching.\n

CMD233C4

2-20 GHz Distributed Low Noise Amplifier

CMD233C4

2-20 GHz Distributed Low Noise Amplifier