CM6206-LX中文资料USB 5.1CH audio codec with Xear driver数据手册Cmedia规格书

描述 Description

CM6206-LX is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM6206-LX, including 5.1CH DAC and earphone buffer, 2CH ADC, microphone gain, PLL, regulator, and USB transceiver. Cause its lower power consumption, it is very suitable for USB multi channel Headset, high end USB external audio box with small form factor or USB multi channel speaker set.Many features are programmable with external EEPROM and MCU interface. In addition, MCU/EEPROM/GPIO control can easily via HID software interface. Better yet, CM6206-LX support stereo MIC, phone jack sense, S/PDIF I/O 48 KHz sampling rate. Moreover, unique patent driver can support world’s first SPEAKER SHIFTER, Karaoke and other advanced functions.

特性 Features

·USB spec. 2.0 full speed compliant
·USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant
·IEC60958 spec. compliant (consumer format S/PDIF input and output with loop-back support)
·SCMS (Serial Copy Management System) compliant
·Dolby® digital audio streaming via S/PDIF out
·USB remote wake-up support
·5.1 channel DAC output with 16 bit resolution 3.1 Vpp (1.1 Vrms) biased at 2.25V output swing Volume control and mute function Earphone buffer 2X interpolator for digital playback data to improve quality
·2 channel ADC input with 16 bit resolution 3.2 Vpp (or 4.0 Vpp programmed by vendor driver) biased at 2.25V input swing Volume control and mute function
·Additional headphone output with selectable source and phone jack sense
·Stereo MIC support with 33dB maximum capability
·Recording source select from S/PDIF, MIC, Line-in and summation of MIC, Line-in and front channel
·MIC, Line-in monitor from front channel (all channels optional) with volume control and mute function
·Master volume control by default; per-channel volume control by C-Media driver
·Playback with soft-mute function
·Support 48 / 44.1 KHz sampling rate for both playback and recording
·MCU support with two-wire serial interface
·Serial EEPROM support for customized VID/PID
·MCU / EEPROM / GPIO control via HID software interface
·Volume up / volume down / playback mute HID button
·LED indicator pins: operation / recording mute / SCMS protection
·C-Media value added software (multi-channel positional 3D sound, EQ, speaker shifter, etc.)
·Embedded USB transceiver and power on reset circuit
·Single 12MHz crystal input with embedded PLL
·Single 5V power supply with embedded 5V to 3.3V regulator
·Industry standard LQFP-48 package