Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC1011 (single), CLC2011 (dual), and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifiers. At 5V, the CLCx011 family uses only 160μA of supply current per amplifier and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to

文件：2.72573 Mbytes 页数：16 Pages

CADEKA

Low Power, Low Cost, Rail-to-Rail I/O Dual Amplifier

The CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifiers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifier and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the negative • 136μA supply current\n• 4.9MHz bandwidth\n• Output swings to within 20mV of either rail\n• Input voltage range exceeds the rail by >250mV\n• 5.3V/μs slew rate\n• 21nV/√Hz input voltage noise\n• ±35mA linear output current\n• Fully specified at 2.7V and 5V supplies;

RESURGENT

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

MaxLinear

迈凌

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC1011 (single), CLC2011 (dual), and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifiers. At 5V, the CLCx011 family uses only 160μA of supply current per amplifier and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to

文件：2.72573 Mbytes 页数：16 Pages

CADEKA

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉

Low Power, Low Cost, Rail-to-Rail I/O Amplifiers

General Description The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifers. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input vol

文件：2.33429 Mbytes 页数：17 Pages

EXAR

艾科嘉