CLC006BMSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1FEATURES

2• No External Pull-down Resistors

• Adjustable Output Amplitude

• Differential Input and Output

• Low Power Dissipation

• Single +5V or −5.2V Supply

• Replaces GS9008 in Most Applications

APPLICATIONS

• Digital Routers and Distribution Amplifiers

• Coaxial Cable Driver for Digital Transmission

Line

• Twisted Pair Driver

• Serial Digital Video Interfaces for the

Commercial and Broadcast Industry

• SMPTE, Sonet/SDH, and ATM Compatible

Driver

• Buffer Applications

KEY SPECIFICATIONS

• 650 ps Rise and Fall Times

• Data Rates to 400 Mbps

• 200 mV Differential Input

• Low Residual Jitter (25 pspp)

DESCRIPTION

Texas Instruments' Comlinear CLC006 is a

monolithic, high-speed cable driver designed for the

SMPTE 259M serial digital video data transmission

standard. The CLC006 drives 75Ω transmission lines

(Belden 8281 or equivalent) at data rates up to 400

Mbps. Controlled output rise and fall times (650 ps typical) minimize transition-induced jitter. The output

voltage swing, typically 1.65V, set by an accurate,

low-drift internal bandgap reference, delivers an 800

mV swing to back-matched and terminated 75Ω

cable. Output swing is adjustable from 0.7 VP-P to 2

VP-P using external resistors.

The CLC006’s class AB output stage consumes less

power than other designs, 185 mW with both outputs

terminated, and requires no external bias resistors.

The differential inputs accept a wide range of digital

signals from 200 mVP-P to ECL levels within the

specified common-mode limits. All this make the

CLC006 an excellent general purpose high speed

driver for digital applications.

The CLC006 is powered from a single +5V or −5.2V

supply and comes in an 8-pin SOIC package.