CDC6C-Q1中文资料Automotive, low-power, low-ppm, bulk-acoustic-wave (BAW), fixed-frequency LVCMOS oscillator数据手册TI规格书

描述 Description

Texas Instruments’ high-precision Bulk-Acoustic Wave (BAW) micro-resonator technology is integrated directly into a package allowing for low jitter clock circuitry. BAW is fully designed and manufactured at TI factories like other silicon-based fabrication processes.

The CDC6Cx-Q1 device is a low jitter, low power, fixed-frequency oscillator which incorporates the BAW as the resonator source. The device is factory-programmed per specific frequency and function pin. With a frequency control logic and output frequency divider, the CDC6Cx-Q1 is capable of producing any frequency within the specified range providing a single device family for all frequency needs.

The high-performance clocking, mechanical stability, lower power consumption, flexibility, and small package options for this device are designed for reference clock and core clocks in automotive applications.

特性 Features

AEC Q-100 qualified:

Device temperature grade 1: –40°C to +125°C



Functional Safety-Capable:

Documentation available to aid functional safety system design



LVCMOS output oscillator supporting frequency range from 250kHz to 200MHz

±25ppm total frequency stability inclusive of all factors and including 10 years aging

Supply voltage supports 1.8V to 3.3V ±10%.

Very low power consumption: 4.57mA typical and 8mA maximum for 25MHz

Standby current 2µA typical helps for battery powered applications

Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz

Smallest industry wettable flank standard package: 1.60mm × 1.20mm (DLY), 2.00mm × 1.60mm (DLR), 2.5mm × 2.00mm (DLF), 3.20mm × 2.5mm (DLN)

Integrated LDO for robust supply noise immunity

Start-up time < 3ms

Contact TI for different start-up times.



Orderable options for slow rise and fall time for EMI reduction



Contact TI representative for any frequency and samples needed.