CD74HCT652M集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

CD74HCT652M属于集成电路（IC）的缓冲器驱动器接收器收发器。由美国德州仪器公司制造生产的CD74HCT652M缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

[ /Title (CD74HC652, CD74HCT652)

/Subject (High-Speed CMOS Logic Octal-Bus

Transceiver/Registers, Three-State)

/Author ()

/Keywords ()

/Creator ()

/DOCINFO pdfmark

[ /PageMode /UseOutlines

/DOCVIEW pdfmark

特性 Features

• CD74HC652, CD74HCT652 . . . . . . . . . . . Non-Inverting

• Independent Registers for A and B Buses

• Three-State Outputs

• Drives 15 LSTTL Loads

• Typical Propagation Delay = 12ns at VCC = 5V,CL = 15pF

• Fanout (Over Temperature Range)

- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads

- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads

• Wide Operating Temperature Range . . . -55oC to 125oC

• Balanced Propagation Delay and Transition Times

• Significant Power Reduction Compared to LSTTL

Logic ICs

• Alternate Source is Philips

• HC Types

- 2V to 6V Operation

- High Noise Immunity: NIL = 30%, NIH = 30% of VCC

at VCC = 5V

• HCT Types

- 4.5V to 5.5V Operation

- Direct LSTTL Input Logic Compatibility,

VIL= 0.8V (Max), VIH = 2V (Min)

- CMOS Input Compatibility, Il ≤ 1μA at VOL, VOH

描述 Description

The CD74HC652 and CD74HCT652 three-state, octal-bus

transceiver/registers use silicon-gate CMOS technology to

achieve operating speeds similar to LSTTL with the low power

consumption of standard CMOS integrated circuits. The

CD74HC652 and CD74HCT652 have non-inverting outputs.

These devices consists of bus transceiver circuits, D-type flipflops,

and control circuitry arranged for multiplexed

transmission of data directly from the data bus or from the

internal storage registers. Output Enables OEAB and OEBA

are provided to control the transceiver functions. SAB and

SBA control pins are provided to select whether real-time or

stored data is transferred. The circuitry used for select control

will eliminate the typical decoding glitch that occurs in a

multiplexer during the transition between stored and real-time

data. A LOW input level selects real-time data, and a HIGH

selects stored data. The following examples demonstrates the

four fundamentals bus-management functions that can be

performed with the octal-bus transceivers and registers.

Data on the A or B data bus, or both, can be stored in the

internal D flip-flops by low-to-high transitions at the appropriate

clock pins (CAB or CBA) regardless of the select of the control

pins. When SAB and SBA are in the real-time transfer mode, it

is also possible to store data without using the D-type flip-flops

by simultaneously enabling OEAB and OEBA. In this

configuration, each output reinforces its input. Thus, when all

other data sources to the two sets of bus lines are at high

impedance, each set of bus lines will remain at its last state.