CD74HC93M96集成电路（IC）的计数器除法器规格书PDF中文资料

CD74HC93M96属于集成电路（IC）的计数器除法器。由德州仪器制造生产的CD74HC93M96计数器，除法器计数器和除法器 IC 是数字逻辑器件，可对输入发生的逻辑转换进行计数，然后使用多个并行输出重新发送累加的计数，和/或生成单个输出信号转换，从而对应用某些整数数量输入信号转换进行响应。除了简单的事件计数，它们还可用于各种频率合成应用。

1 Features

• Can be configured to divide by 2, 8, and 16

• Asynchronous reset

• Fanout (over temperature range)

– Standard outputs: 10 LSTTL loads

– Bus driver outputs: 15 LSTTL loads

• Wide operating temperature range: – 55°C to

125°C

• Balances propagation delay and transition times

• Signigicant power reduction compared to LSTTL

logic ICs

• HC types

– 2 V to 6 V operation

– High noise immunity: NIL = 30%, NIH = 30% of

VCC

• HCT types

– 4.5 V to 5.5 V operation

– Direct LSTTL input logic compatibility, VIL = 0.8

V (max), VIH = 2 V (min)

– CMOS input compatibility, II ≤ 1 μA at VOL, VOH

2 Description

The CD74HC93 and CD74HCT93 are high-speed

silicon-gate CMOS devices and are pin-compatible

with low power Schottky TTL (LSTTL). These 4-

bit binary ripple counters consist of four flip-flops

internally connected to provide a divide-by-two section

and a divide-by-eight section. Each section has

a separate clock input (CP0 and CP1) to initiate

state changes of the counter on the HIGH to LOW

clock transition. State changes of the Qn outputs do

not occur simultaneously because of internal ripple

delays. Therefore, decoded output signals are subject

to decoding spikes and should not be used for clocks

or strobes.