CD74HC4515M集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

CD74HC4515M属于集成电路（IC）的信号开关多路复用器解码器。由德州仪器制造生产的CD74HC4515M信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

特性 Features

• Multifunction Capability

- Binary to 1-of-16 Decoder

- 1-to-16 Line Demultiplexer

• Fanout (Over Temperature Range)

- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads

- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads

• Wide Operating Temperature Range . . . -55oC to 125oC

• Balanced Propagation Delay and Transition Times

• Significant Power Reduction Compared to LSTTL

Logic ICs

• HC Types

- 2V to 6V Operation

- High Noise Immunity: NIL = 30%, NIH = 30% of VCC

at VCC = 5V

描述 Description

The CD54HC4514, CD74HC4514, and CD74HC4515 are

high-speed silicon gate devices consisting of a 4-bit strobed

latch and a 4- to 16-line decoder. The selected output is

enabled by a low on the enable input (E). A high on E inhibits

selection of any output. Demultiplexing is accomplished by

using the E input as the data input and the select inputs (A0-

A3) as addresses. This E input also serves as a chip select

when these devices are cascaded.

When Latch Enable (LE) is high the output follows changes

in the inputs (see truth table). When LE is low the output is

isolated from changes in the input and remains at the level

(high for the 4514, low for the 4515) it had before the latches

were enabled. These devices, enhanced versions of the

equivalent CMOS types, can drive 10 LSTTL loads.