CD74HC4017集成电路（IC）的计数器除法器规格书PDF中文资料

CD74HC4017属于集成电路（IC）的计数器除法器。由德州仪器制造生产的CD74HC4017计数器，除法器计数器和除法器 IC 是数字逻辑器件，可对输入发生的逻辑转换进行计数，然后使用多个并行输出重新发送累加的计数，和/或生成单个输出信号转换，从而对应用某些整数数量输入信号转换进行响应。除了简单的事件计数，它们还可用于各种频率合成应用。

Qualified for Automotive Applications

Fully Static Operation

Buffered Inputs

Common Reset

Positive Edge Clocking

Typical fMAX = 60 MHz at VCC = 5 V,

CL = 15 pF, TA = 25°C

Fanout (Over Temperature Range)

− Standard Outputs . . . 10 LSTTL Loads

− Bus Driver Outputs . . . 15 LSTTL Loads

Balanced Propagation Delay and Transition

Times

Significant Power Reduction Compared to

LSTTL Logic ICs

VCC Voltage = 2 V to 6 V

High Noise Immunity NIL or NIH = 30% of

VCC, VCC = 5 V

description/ordering information

The CD74HC4017 is a high-speed silicon-gate

CMOS 5-stage Johnson counter with ten decoded

outputs. Each of the decoded outputs normally is low

and sequentially goes high on the low-to-high transition clock period of the ten-clock-period cycle. The carry

(TC) output transitions low to high after output 9 goes from high to low, and can be used in conjunction with the

clock enable (CE) input to cascade several stages. CE disables counting when in the high state. A master reset

(MR) input also is provided that, when taken high, sets all the decoded outputs, except output 0, to low.

The device can drive up to ten low-power Schottky equivalent loads.