CD74FCT273E.A中文资料德州仪器数据手册PDF规格书

BiCMOS Technology With Low Quiescent

Power

Buffered Inputs

Direct Clear Input

48-mA Output Sink Current

Output Voltage Swing Limited to 3.7 V

Controlled Output Edge Rates

Input/Output Isolation From VCC

SCR Latch-Up-Resistant BiCMOS Process

and Circuit Design

Applications Include:

– Buffer/Storage Registers

– Shift Registers

– Pattern Generators

Package Options Include Plastic

Small-Outline (M) Package and Standard

Plastic (E) DIP

description

The CD74FCT273 is a positive-edge-triggered, D-type flip-flop with a direct clear (CLR) input. This device uses

a small-geometry BiCMOS technology. The output stage is a combination of bipolar and CMOS transistors that

limits the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V)

reduces power-bus ringing [a source of electromagnetic interference (EMI)] and minimizes VCC bounce and

ground bounce and their effects during simultaneous output switching. The output configuration also enhances

switching speed and is capable of sinking 48 mA.

Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the

positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a particular voltage level and is not

directly related to the transition time of the positive-going pulse. When CLK is at either the high or low level, the

D input has no effect at the output. All eight flip-flops are controlled by a common clock (CLK) and a common

reset (CLR). The outputs are placed in a low state when CLR is taken low, independent of the CLK.

The CD74FCT273 is characterized for operation from 0°C to 70°C.