CMOS 4 x 4 Multiport Register

Description The CD40108BMS is a 4 x 4 multiport register containing four 4-bit registers, write address decoder, two separate read address decoders, and two 3-state output buses. When the ENABLE input is low, the corresponding output bus is switched, independently of the clock, to a high-imp

文件：157.37 Kbytes 页数：11 Pages

Intersil

CMOS 4 x 4 Multiport Register

Renesas

瑞萨

CMOS 4 x 4 Multiport Register

Description The CD40108BMS is a 4 x 4 multiport register containing four 4-bit registers, write address decoder, two separate read address decoders, and two 3-state output buses. When the ENABLE input is low, the corresponding output bus is switched, independently of the clock, to a high-imp

文件：157.37 Kbytes 页数：11 Pages

Intersil

CMOS 4 x 4 Multiport Register

Description\nThe CD40108BMS is a 4 x 4 multiport register containing four 4-bit registers, write address decoder, two separate read address decoders, and two 3-state output buses.\nWhen the ENABLE input is low, the corresponding output bus is switched, independently of the clock, to a high-impedance • High Voltage Type (20V Rating)\n• Four 4-Bit Registers\n• One Input and Two Output Buses\n• Unlimited Expansion in Bit and Word Directions\n• Data Lines have latched Inputs\n• 3-State Outputs\n• Separate Control of Each Bus, Allowing Simultaneous Independent Reading of Any of Four Registers on Bus;

Renesas

瑞萨