CC3350MOD中文资料SimpleLinkTM dual-band (2.4 and 5 GHz) Wi-Fi 6 companion module数据手册TI规格书

描述 Description

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC335xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

CC3350MOD: A 2.4GHz and 5GHz Wi-Fi 6 companion module CC3351MOD: A 2.4GHz and 5GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module The CC335xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 a/b/g/n) and Wi-Fi 5 (802.11ac). These CC335xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC335xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC335xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

特性 Features

Key Features

Wi-Fi 6 (802.11ax)

Bluetooth Low Energy 5.4 in CC33x1MOD

Companion module to any processor or MCU host capable of running a TCP/IP stack

Integrated 2.4GHz and 5GHz PA for a complete wireless system with up to +18dBm output power

Operating temperature: –40°C to +85°C

Application throughput up to 50Mbps

Regulatory Certification (in progress)

FCC

IC/ISED

ETSI/CE

MIC (TELEC)



QuickTrack Qualified

Bluetooth Controller Subsystem Qualified

Extended Features

Wi-Fi 6

2.4GHz and 5GHz, 20MHz, single spatial stream

MAC, baseband, and RF transceiver with support for IEEE 802.11 a/b/g/n/ax

Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger frame for improved efficiency

Hardware-based encryption and decryption supporting WPA2 and WPA3

Excellent interoperability

Support for 4-bit SDIO or SPI host interfaces



Bluetooth Low Energy 5.4

LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension

Host controller interface (HCI) transport with an option for UART or shared SDIO

Internal coexistence mechanism with Wi-Fi to share the same antenna



Enhanced Security

Secured host interface

Firmware authentication

Anti-rollback protection



Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)

Optional antenna diversity or selection

3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)

Clock sources

40MHz XTAL fast clock (Integrated into the module)

Internal slow clock or external 32.768kHz slow clock



Small package size

Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch