CC3300MOD中文资料SimpleLink™ Wi-Fi 6 配套模块数据手册TI规格书

描述 Description

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

CC3300MOD: A 2.4GHz Wi-Fi 6 companion module CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

特性 Features

Key Features

Wi-Fi 6 (802.11ax)

Bluetooth Low Energy 5.4 in CC33x1MOD

Companion module to any processor or MCU host capable of running a TCP/IP stack

Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power

Operating temperature: –40°C to +85°C

Application throughput up to 50Mbps

Regulatory Certification

FCC: Z64-CC33SBMOD

IC/ISED: 461I-CC33SBMOD

ETSI/CE

MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)



Based on CC3301 QuickTrack Qualified chipset

Bluetooth Controller Subsystem Qualified

Extended Features

Wi-Fi 6

2.4GHz, 20MHz, single spatial stream

MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax

Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency

Hardware-based encryption and decryption supporting WPA2 and WPA3

Excellent interoperability

Support for 4-bit SDIO or SPI host interfaces



Bluetooth Low Energy 5.4

LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension

Host controller interface (HCI) transport with an option for UART or shared SDIO

Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna



Enhanced Security

Secured host interface

Firmware authentication

Anti-rollback protection



Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)

Optional antenna diversity or selection

3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)

Clock sources

40MHz XTAL fast clock (Integrated into the module)

Internal slow clock or external 32.768kHz slow clock



Small package size

Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch