CC2651P31T0RKPRG4.A中文资料德州仪器数据手册PDF规格书

1 Features

Wireless microcontroller

• Powerful 48-MHz Arm® Cortex®-M4 processor

• 352KB flash program memory

• 32KB of ultra-low leakage SRAM

• 8KB of Cache SRAM (Alternatively available as

general-purpose RAM)

• Programmable radio includes support for 2-

(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low

Energy, IEEE 802.15.4 PHY and MAC

• Supports over-the-air upgrade (OTA)

Low power consumption

• MCU consumption:

– 2.91 mA active mode, CoreMark®

– 61 μA/MHz running CoreMark

– 0.8 μA standby mode, RTC, 32KB RAM

– 0.1 μA shutdown mode, wake-up on pin

• Radio Consumption:

– 6.4 mA RX

– 7.1 mA TX at 0 dBm

– 9.5 mA TX at +5 dBm

– 22 mA TX at +10 dBm

– 101 mA TX at +20 dBm (7x7 package)

Wireless protocol support

• Zigbee®

• Bluetooth® 5.2 Low Energy

• SimpleLink™ TI 15.4-stack

• Proprietary systems

High performance radio

• -104 dBm for Bluetooth® Low Energy 125-kbps

• Output power up to +20 dBm with temperature

compensation

Regulatory compliance

• Suitable for systems targeting compliance with

these standards:

– ETSI EN 300 328, EN 300 440 Cat. 2 and 3

– FCC CFR47 Part 15

– ARIB STD-T66

MCU peripherals

• Digital peripherals can be routed to any GPIO

• Four 32-bit or eight 16-bit general-purpose timers

• 12-bit ADC, 200 kSamples/s, 8 channels

• 8-bit DAC

• Analog Comparator

• UART, SSI, I2C, I2S

• Real-time clock (RTC)

• Integrated temperature and battery monitor

Security enablers

• AES 128-bit cryptographic accelerator

• True random number generator (TRNG)

• Additional cryptography drivers available in

Software Development Kit (SDK)

Development tools and software

• LP-CC2651P3 Development Kit

• SimpleLink™ CC13xx and CC26xx Software

Development Kit (SDK)

• SmartRF™ Studio for simple radio configuration

• SysConfig system configuration tool

Operating range

• On-chip buck DC/DC converter

• 1.8-V to 3.8-V single supply voltage

• -40 to +105°C

Package

• 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)

• 5-mm × 5-mm RKP VQFN40 (18 GPIOs)

• RoHS-compliant package

2 Applications

• 2400 to 2500 MHz ISM and SRD systems 1

with down to 4 kHz of receive bandwidth

• Building automation

– Building security systems – motion detector,

electronic smart lock, door and window sensor,

garage door system, gateway

– HVAC – thermostat, wireless environmental

sensor, HVAC system controller, gateway

– Fire safety system – smoke and heat detector,

fire alarm control panel (FACP)

– Video surveillance – IP network camera

– Elevators and escalators – elevator main

control panel for elevators and escalators

• Industrial transport – asset tracking

• Factory automation and control

• Medical

• Electronic point of sale (EPOS) – Electronic Shelf

Label (ESL)

• Communication equipment

– Wired networking – wireless LAN or Wi-Fi

access points, edge router , small business

router

• Personal electronics

– Home theater & entertainment – smart

speakers, smart display, set-top box

– Wearables (non-medical) – smart trackers,

smart clothing

3 Description

The SimpleLink™ CC2651P3 device is a single-protocol 2.4-GHz wireless microcontroller (MCU) supporting

Zigbee®, Bluetooth®5.2 Low Energy, IEEE 802.15.4g, TI 15.4-Stack (2.4 GHz). The CC2651P3 is based on an

Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing

in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2651P3 has a software defined radio powered by an Arm® Cortex® M0, which allows support for

multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency

band. The CC2651P3 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBm TX at

101 mA (7x7 package). CC2651P3 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy

Coded PHY.

The CC2651P3 has a low sleep current of 0.8 μA with RTC and 32KB RAM retention.

Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle

policy with a commitment to product longevity and continuity of supply.

The CC2651P3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low

Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCUs. CC2651P3 is

part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options.

The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system

configuration tool supports migration between devices in the portfolio. A comprehensive number of software

stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more

information, visit wireless connectivity.