CC2640R2RF/IF射频/中频RFID的射频收发器IC规格书PDF中文资料

CC2640R2属于RF/IF射频/中频RFID的射频收发器IC。由德州仪器制造生产的CC2640R2射频收发器 IC射频收发器 IC 是将发射器和接收器集成于单个封装的半导体器件。收发器适用于各种射频系列产品或标准，例如 AISG、蓝牙、ISM、VHF、Wi-Fi、蜂窝、雷达、802.15.4 和 Z-Wave。此产品可根据调制类型和特定协议版本进一步分类。部分 IC 包含内置微控制器。

1.1 Features 1

• Microcontroller

– Powerful Arm® Cortex®-M3 Processor

– EEMBC CoreMark® Score: 142

– EEMBC ULPBench™ Score: 158

– Clock Speed up to 48-MHz

– 32KB, 64KB, and 128KB of In-System

Programmable Flash

– 8KB of SRAM for Cache

(or as General-Purpose RAM)

– 20KB of Ultra-Low-Leakage SRAM

– 2-Pin cJTAG and JTAG Debugging

– Supports Over-the-Air (OTA) Update

• Ultra-Low-Power Sensor Controller

– Can Run Autonomously From the Rest of the

System

– 16-Bit Architecture

– 2KB of Ultra-Low-Leakage SRAM for Code and

Data

• Efficient Code-Size Architecture, Placing Parts of

TI-RTOS, Drivers, and Bootloader in ROM

• RoHS-Compliant Package

– 7-mm × 7-mm RGZ VQFN48 (30 GPIOs)

– 5-mm × 5-mm RHB VQFN32 (15 GPIOs)

– 4-mm × 4-mm RSM VQFN32 (10 GPIOs)

• Peripherals

– All Digital Peripheral Pins Can Be Routed to

Any GPIO

– Four General-Purpose Timer Modules

(Eight 16-Bit or Four 32-Bit Timers, PWM Each)

– 12-Bit ADC, 200 ksamples/s, 8-Channel Analog

MUX

– Continuous Time Comparator

– Ultra-Low-Power Clocked Comparator

– Programmable Current Source

– UART

– 2× SSI (SPI, MICROWIRE, TI)

– I2C, I2S

– Real-Time Clock (RTC)

– AES-128 Security Module

– True Random Number Generator (TRNG)

– Support for Eight Capacitive Sensing Buttons

– Integrated Temperature Sensor

• External System

– On-Chip Internal DC/DC Converter

– Seamless Integration With the SimpleLink™

CC1190 Range Extender

• Low Power

– Wide Supply Voltage Range: 1.8 to 3.8 V

– RX: 5.4 mA

– TX at +10 dBm: 13.4 mA

– Active-Mode MCU 48 MHz Running Coremark:

2.5 mA (51 μA/MHz)

– Active-Mode MCU: 48.5 CoreMark/mA

– Active-Mode Sensor Controller at 24 MHz:

0.4 mA + 8.2 μA/MHz

– Sensor Controller, One Wakeup Every Second

Performing One 12-Bit ADC Sampling: 0.95 μA

– Standby: 0.7 μA (RTC Running and RAM and

CPU Retention)

– Shutdown: 185 nA (Wakeup on External Events)

• RF Section

– Excellent Receiver Sensitivity –124 dBm Using

Long-Range Mode, –110 dBm at 50 kbps

– Excellent Selectivity (±100 kHz): 56 dB

– Excellent Blocking Performance (±10 MHz):

90 dB

– Programmable Output Power up to +15 dBm

– Single-Ended or Differential RF Interface

– Suitable for Systems Targeting Compliance With

Worldwide Radio Frequency Regulations

– ETSI EN 300 220, EN 303 204 (Europe)

– FCC CFR47 Part 15 (US)

– ARIB STD-T108 (Japan)

– Wireless M-Bus (EN 13757-4) and IEEE®

802.15.4g PHY

• Tools and Development Environment

– Full-Feature and Low-Cost Development Kits

– Multiple Reference Designs for Different RF

Configurations

– Packet Sniffer PC Software

– Sensor Controller Studio

– SmartRF™ Studio

– SmartRF Flash Programmer 2

– IAR Embedded Workbench® for Arm

– Code Composer Studio™ (CCS) IDE

– CCS UniFlash

1.2 Applications

• 315-, 433-, 470-, 500-, 779-, 868-, 915-,

920-MHz ISM and SRD Systems

• Low-Power Wireless Systems

With 50-kHz to 5-MHz Channel Spacing

• Home and Building Automation

• Wireless Alarm and Security Systems

• Industrial Monitoring and Control

• Smart Grid and Automatic Meter Reading

• Wireless Healthcare Applications

• Wireless Sensor Networks

• Active RFID

• IEEE 802.15.4g, IP-Enabled Smart Objects

(6LoWPAN), Wireless M-Bus, KNX Systems,

Wi-SUN™, and Proprietary Systems

• Energy-Harvesting Applications

• Electronic Shelf Label (ESL)

• Long-Range Sensor Applications

• Heat-Cost Allocators

1.3 Description

The CC1310 device is a cost-effective, ultra-low-power, Sub-1 GHz RF device from Texas Instruments™

that is part of the SimpleLink™ microcontroller (MCU) platform. The platform consists of Wi-Fi®, Bluetooth®

low energy, Sub-1 GHz, Ethernet, Zigbee®, Thread, and host MCUs. These devices all share a common,

easy-to-use development environment with a single core software development kit (SDK) and a rich tool

set. A one-time integration of the SimpleLink platform enables users to add any combination of devices

from the portfolio into their design, allowing 100 percent code reuse when design requirements change.

For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the

CC1310 device provides excellent battery life and allows long-range operation on small coin-cell batteries

and in energy harvesting applications.

The CC1310 is a device in the CC13xx and CC26xx family of cost-effective, ultra-low-power wireless

MCUs capable of handling Sub-1 GHz RF frequencies. The CC1310 device combines a flexible, very lowpower

RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting

multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level

RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The

low-power consumption of the CC1310 device does not come at the expense of RF performance; the

CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system

and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU

that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can

maximize sleep time.

The power and clock management and radio systems of the CC1310 device require specific configuration

and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI

recommends using this software framework for all application development on the device. The complete

TI-RTOS and device drivers are offered free of charge in source code.