CC2340R53-Q1中文资料德州仪器数据手册PDF规格书

1 Features

Wireless microcontroller

• AEC-Q100 Grade 2 qualified for automotive

applications

• Optimized 48MHz Arm® Cortex®-M0+ processor

• 512KB of in-system programmable flash

• 12KB of ROM for bootloader and drivers

• 2.4GHz RF transceiver compatible with Bluetooth®

5.4 Low Energy

• Up to 64KB of ultra-low leakage SRAM. Full RAM

retention in standby mode

• Integrated balun

• Supports over-the-air upgrade (OTA)

• Serial wire debug (SWD)

Low power consumption

• MCU consumption:

– 2.6mA active mode, CoreMark®

– 53μA/MHz running CoreMark®

– < 710nA standby mode, RTC, 64KB RAM

– 165nA shutdown mode, wake-up on pin

• Radio consumption:

– 5.3mA RX

– 5.1mA TX at 0dBm

– < 11.0mA TX at +8dBm

Wireless protocol support

• Bluetooth® 5.4 Low Energy

High-performance radio

• –102dBm for Bluetooth® Low Energy 125kbps

• –96.5dBm for Bluetooth® Low Energy 1Mbps

• Output power up to +8dBm with temperature

compensation

Regulatory compliance

• Suitable for systems targeting compliance with

these standards:

– EN 300 328 (Europe)

– FCC CFR47 Part 15

– ARIB STD-T66 (Japan)

MCU peripherals

• 19 I/O Pads

– 2 IO pads SWD, muxed with GPIOs

– 2 IO pads LFXT, muxed with GPIOs

– 15 DIOs (analog or digital IOs)

• 3 × 16-bit and 1× 24-bit general-purpose timers,

quadrature decode mode support

• 12-bit ADC, 1.2Msps with external reference,

267ksps with internal reference, eight external

ADC inputs

• 1× low-power comparator

• 1× UART

• 1× SPI

• 1× I2C

• Real-time clock (RTC)

• Integrated temperature and battery monitor

• Watchdog timer

Security enablers

• AES 128-bit cryptographic accelerator

• Random number generator from on-chip analog

noise

Product Cybersecurity Compliance

• ISO 21434 compliant (Cybersecurity Assurance

Level 2)

• Developed for cybersecurity-relevant applications

• Documentation available to aid cybersecurity

system design

Development tools and software

• LP-EM-CC2340R5 LaunchPad Development Kit

• SimpleLink™ CC23xx Software Development Kit

(SDK)

• SmartRF™ Studio for simple radio configuration

• SysConfig system configuration tool

Operating range

• On-chip buck DC/DC converter

• 1.71V to 3.8V single supply voltage

• Tj: –40 to +125°C

• HBM ESD Classification Level 2 (ESD CDM level

1C on RF pin, per AEC-Q100 Rev. J)

• CDM ESD Classification Level 2A (ESD CDM level

C1 on RF pin, per AEC-Q100 Rev. J)

RoHS-compliant package

• 5mm × 5mm RHB QFN32 with wettable flanks (19

GPIOs)

2 Applications

• Automotive

– Car access and security systems

• Passive entry passive start (PEPS)

• Remote keyless entry (RKE)

– Advanced driver assistance systems (ADAS)

– Tire pressure monitoring systems (TPMS)

3 Description

The SimpleLink™ CC2340R5-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting

Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication

in applications such as tire pressure monitoring systems (TPMS), car access, including key fobs used in passive

entry passive start (PEPS) and remote keyless entry (RKE), cable replacement, and smartphone connectivity.

The highlighted features of this device include:

• Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and

500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and

support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.

• Fully qualified Bluetooth 5.4 software protocol stack included with the SimpleLink™ CC23xx Software

Development Kit (SDK)

• Ultra-low standby current less than 0.71μA with RTC operational and full RAM retention that enables

significant battery life extension, especially for applications with longer sleep intervals.

• Integrated balun for reduced bill-of-material (BOM) board layout

• Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy

(–102dBm for 125kbps LE Coded PHY, with integrated balun)

The CC2340R5-Q1 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low

Energy, Thread, Zigbee, Sub1GHz MCUs, and host MCUs that all share a common, easy-to-use development

environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the

SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing

100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU

platform.