CC115LRGPRF/IF射频/中频RFID的射频发射器规格书PDF中文资料

CC115LRGP属于RF/IF射频/中频RFID的射频发射器。由德州仪器制造生产的CC115LRGP射频发射器RF 发射器用于发送射频信号并调制该信号以承载系统中的数据。频率范围为 315 Hz 至 64 GHz，数据速率为 3 kbps 至 2 Mbps，功率输出为 -30 dBm 至 24.7 dBm。数据接口有连接器、I2C、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB，天线连接方式有堡形、板载、PCB 和通孔。

1.1 Features 1

• RF Performance

– Programmable Output Power up to +12 dBm

– Programmable Data Rate from 0.6 to 600 kbps

– Frequency Bands: 300–348 MHz,

387–464 MHz, and 779–928 MHz

– 2-FSK, 4-FSK, GFSK, and OOK Supported

• Digital Features

– Flexible Support for Packet Oriented Systems

– On-chip Support for Sync Word Insertion,

Flexible Packet Length, and Automatic CRC

Calculation

• Low-Power Features

– 200-nA Sleep Mode Current Consumption

– Fast Startup Time; 240 μs From Sleep to TX

Mode

– 64-Byte TX FIFO

• General

– Few External Components; Fully Integrated

Frequency Synthesizer

– Green Package: RoHS Compliant and No

Antimony or Bromine

– Small Size (QLP 4- x 4-mm Package, 20 Pins)

– Suited for Systems Targeting Compliance with

EN 300 220 V2.3.1 (Europe) and FCC CFR Part

15 (US)

– Support for Asynchronous and Synchronous

Serial Transmit Mode for Backward

Compatibility with Existing Radio Communication Protocols

1.2 Applications

• Ultra Low-Power Wireless Applications Operating

in the 315-, 433-, 868-, 915-MHz ISM or SRD

Bands

• Wireless Alarm and Security Systems

• Industrial Monitoring and Control

• Remote Controls

• Toys

• Home and Building Automation

• Active RFID

1.3 Description

The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101

RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter

together with the CC113L value line receiver enables a low-cost RF link.

The RF transmitter is integrated with a highly configurable baseband modulator. The modem supports

various modulation formats and has a configurable data rates from 0.6 to 600 kbps.

The CC115L provides extensive hardware support for packet handling, data buffering, and burst

transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC115L can be controlled through a

serial peripheral interface (SPI). In a typical system, the CC115L will be used together with a

microcontroller and a few additional passive components.