CC1120开发板套件编程器的射频评估开发套件开发板规格书PDF中文资料

CC1120属于开发板套件编程器的射频评估开发套件开发板。由德州仪器制造生产的CC1120射频评估和开发套件，开发板本系列中的产品适用于在已知实施环境中，提供能访问射频相关器件的功能或者有助于访问该功能。所含的焦点产品范围从射频信号链元器件（如放大器和检测器）到模块化收发器，以及不直接包含焦点产品的适配器硬件，但此类硬件可供方便地访问用户单独提供的特定射频产品或系列。

1.1 Features 1

• High-Performance, Single-Chip Transceiver

– Adjacent Channel Selectivity:

64 dB at 12.5-kHz Offset

– Blocking Performance: 91 dB at 10 MHz

– Excellent Receiver Sensitivity:

• –123 dBm at 1.2 kbps

• –110 dBm at 50 kbps

• –127 dBm Using Built-in Coding Gain

– Very Low Phase Noise:

–111 dBc/Hz at 10-kHz Offset

• Suitable for Systems Targeting ETSI Category 1

Compliance in 169-MHz and 433-MHz Bands

• High Spectral Efficiency (9.6 kbps in 12.5-kHz

Channel in Compliance With FCC Narrowbanding

Mandate)

• Separate 128-Byte RX and TX FIFOs

• Support for Seamless Integration With the CC1190

Device for Increased Range Giving up to 3-dB

Improvement in Sensitivity and up to +27-dBm

Output Power

• Power Supply

– Wide Supply Voltage Range (2.0 V to 3.6 V)

– Low Current Consumption:

• RX: 2 mA in RX Sniff Mode

• RX: 17 mA Peak Current in Low-Power

Mode

• RX: 22 mA Peak Current in

High-Performance Mode

• TX: 45 mA at +14 dBm

– Power Down: 0.12 μA

(0.5 μA With eWOR Timer Running)

• Programmable Output Power up to +16 dBm With

0.4-dB Step Size

• Automatic Output Power Ramping

• Configurable Data Rates: 0 to 200 kbps

• Supported Modulation Formats: 2-FSK,

2-GFSK, 4-FSK, 4-GFSK, MSK, OOK

• WaveMatch: Advanced Digital Signal Processing

for Improved Sync Detect Performance

• RoHS-Compliant 5-mm × 5-mm No-Lead QFN

32-Pin Package (RHB)

• Regulations – Suitable for Systems Targeting

Compliance With

– Europe: ETSI EN 300 220, ETSI EN 54-25

– US: FCC CFR47 Part 15, FCC CFR47 Part 90,

24, and 101

– Japan: ARIB RCR STD-T30, ARIB STD-T67,

ARIB STD-T108

• Peripherals and Support Functions

– Enhanced Wake-On-Radio (eWOR)

Functionality for Automatic Low-Power Receive

Polling

– Includes Functions for Antenna Diversity

Support

– Support for Retransmissions

– Support for Automatic Acknowledge of Received

Packets

– TCXO Support and Control, Also in Power

Modes

– Automatic Clear Channel Assessment (CCA) for

Listen-Before-Talk (LBT) Systems

– Built-in Coding Gain Support for Increased

Range and Robustness

– Digital RSSI Measurement

– Temperature Sensor

1.2 Applications

• Narrowband Ultra-Low-Power Wireless Systems

With Channel Spacing Down to

12.5 kHz

• 169-, 315-, 433-, 868-, 915-, 920-, 950-MHz

ISM/SRD Band

• Wireless Metering and Wireless Smart Grid

(AMR and AMI)

• IEEE 802.15.4g Systems

• Home and Building Automation

• Wireless Alarm and Security Systems

• Industrial Monitoring and Control

• Wireless Healthcare Applications

• Wireless Sensor Networks and Active RFID

• Private Mobile Radios

1.3 Description

The CC1120 device is a fully integrated single-chip radio transceiver designed for high performance at

very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus

removing the need for costly external SAW and IF filters. The device is mainly intended for Industrial,

Scientific, and Medical (ISM) applications and Short Range Device (SRD) frequency bands at

164 to 192 MHz, 274 to 320 MHz, 410 to 480 MHz, and 820 to 960 MHz.

The CC1120 device provides extensive hardware support for packet handling, data buffering, burst

transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating

parameters of the CC1120 device can be controlled through an SPI interface. In a typical system, the

CC1120 device is used with a microcontroller and only a few external passive components.