CBTL06GP213EE中文资料Second-generation high performance general purpose switch数据手册恩XP规格书

描述 Description

The CBTL06GP213 is a six-channel (‘hex’) multiplexer for DisplayPort, HDMI andPCI Express applications at Generation 2 (‘Gen2’) speeds. It provides four differentialchannels capable of 1 : 2 switching or 2 : 1 multiplexing bidirectional, AC‑coupledPCI Express, DisplayPort signals, USB3 SuperSpeed or DC coupled TMDS signals, usinghigh‑bandwidth pass‑gate technology. It provides support for high common‑mode/biasvoltage on the high‑speed differential channels. Additionally, it provides forswitching/multiplexing of the Hot Plug Detect signal as well as the AUX or DDC (DisplayData Channel) signals, for a total of six channels on the display side. The AUX and DDCchannels provide a four-position multiplexer such that an additional level of multiplexingcan be accomplished when AUX and DDC I/Os are on separate pins of the display sourcedevice.
The CBTL06GP213 is designed for Gen2 speeds, supporting 5.0 Gbit/s for PCI Express, 5.4 Gbit/sfor DisplayPort or 6 Gbit/s for HDMI 2.0. It consumes 490 μA current (typical) inoperational mode and provides a shutdown function to support battery-poweredapplications.
typical application of CBTL06GP213 is on applications where one of two GPU display sources mustbe selected to connect to a display sink device or connector. A controller chip selectswhich path to use by setting a select signal HIGH or LOW. Due to the non-directionalnature of the signal paths (which use high-bandwidth pass gate technology), theCBTL06GP213 can also be used in the reverse topology, for example, to connect onedisplay source device to one of two display sink devices or connectors.

特性 Features

1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.2 - 5.4 Gbit/s) PCI Express(v2.0 - 5.0 Gbit/s) signals, USB3 SuperSpeed or HDMI 2.0 (6 Gbit/s) TMDSsignals4 high-speed differential channels with 2 : 1 muxing/switching for DisplayPort orPCI Express or HDMI signals
1 channel with 4 : 1 or 4 : 2 muxing/switching for AUX at 1 Mbit/s or DDC signals,USB2 signals
1 channel with 2 : 1 muxing/switching for single-ended HPD signal
High-bandwidth analog pass-gate technology
Supports high-speed signal switching over a wide common-mode range anddifferential swing
RON on DP high-speed channels: 7 Ω
Low insertion loss:-0.9 dB at 100 MHz
-1.1 dB at 1.35 GHz
-1.3 dB at 2.7 GHz
-3 dB bandwidth at 9.5 GHz
Low crosstalk: -32 dB at 2.7 GHz
Low off-state isolation: -23 dB at 2.7 GHz
Low return loss: -19 dB at 2.7 GHz
Very low intra-pair skew (5 ps typical)
Very low inter-pair skew (< 80 ps)
Switch/multiplexer position select CMOS input
Shutdown mode CMOS input
Supports backdrive protection
Single 3.3 V power supply
Operation current of 490 μA typical, shut-down current 10 μA maximum
ESD 2 kV HBM, 500 V CDM
Available in 5 mm x 5 mm, 0.5 mm ball pitch TFBGA50 package

应用 Application

Motherboard applications requiring DisplayPort, HDMI, PCI Express, and USBswitching/multiplexing
Docking stations
Notebook computers
Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to boardconnectors