丝印：23；Package：DHX2QFN14；5 Gbps rail-to-rail low insertion loss switch

General description The CBTL02GP023 is a one port high performance 5 Gbps rail-to-rail low insertion loss 4x SPST switch chip optimized to interface USB3.0 signals with high voltage (e.g. USB2 signals) off isolation. It supports 5 Gbps USB3.0 signals and large swing USB2 or UART signals in don

文件：433.46 Kbytes 页数：19 Pages

恩XP

5 Gbps轨对轨低插入损耗开关

CBTL02GP023是一款单端口高性能的5 Gbps轨对轨低插入损耗4x SPST开关芯片，经过优化，可连接USB3.0信号与高电压(例如USB2信号)隔离。它在Dongle或插头应用中支持5 Gbps USB3.0信号和大摆幅USB2或UART信号。它也可以用作其他应用中的通用5 Gbps轨对轨低插入损耗开关芯片。\n 所有输入或输出引脚的共模电压具有从0 V到VDD的宽共模范围。\n CBTL02GP023为1.5 mm x 2.1 mm x 0.32 mm规格的DHX2QFN14封装，间距为0.4 mm。 单端口(两个差分通道) 5 Gbps轨对轨低插入损耗开关\n 差分通道：低插入损耗：2.5 GHz时为-1.5 dB；100 MHz时为-1 dB低回波损失：2.5 GHz时小于-15 dB\n 低导通电阻：11 Ω (典型值)\n 带宽：7 GHz(典型值)低关闭状态隔离：2.5 GHz时为-16 dB; 在100 MHz时为-40 dB低DDNEXT串扰：在2.5 GHz和500 MHz时为VIC共模输入电压： 0至VDD\n 差分输入电压VID: 1.2 V (最大值)\n 对内延迟差：6 ps (典型值)\n\n Dongle或插头中VDD电源电压的范围：2.7 V (最小值)至3.5;

恩XP

5 Gbps rail-to-rail low insertion loss switch

General description The CBTL02GP023 is a one port high performance 5 Gbps rail-to-rail low insertion loss 4x SPST switch chip optimized to interface USB3.0 signals with high voltage (e.g. USB2 signals) off isolation. It supports 5 Gbps USB3.0 signals and large swing USB2 or UART signals in don

文件：433.46 Kbytes 页数：19 Pages

恩XP

5 Gbps rail-to-rail Low Insertion Loss Switch

The CBTL02GP023 is a one port high performance 5 Gbps rail-to-rail low insertion loss 4x SPST switch chip optimized to interface USB3.0 signals with high voltage (e.g. USB2 signals) off isolation. It supports 5 Gbps USB3.0 signals and large swing USB2 or UART signals in dongle or plug applications. • One port (two differential channels) 5 Gbps rail-to-rail low insertion loss switch\n• Differential channels:• Low insertion loss: -1.5 dB at 2.5 GHz; -1 dB at 100 MHzLow return loss: < -15 dB at 2.5 GHz\n• Low ON-state resistance: 11 Ω (typ)\n• Bandwidth: 7 GHz (typ)Low off-state isolation: -16 dB;

恩XP