CAT1024数据手册集成电路（IC）的监控器规格书PDF

描述 Description

The CAT1024 is a complete memory and supervisory solution for microcontroller-based systems. A 2 k-bit serial EEPROM memory and a system power supervisor with brown-out protection are integrated together in low power CMOS technology. Memory interface is via a 400 kHz I²C bus.The CAT1024 provides a precision VCC sense circuit, but has only a RESET output and does not have a Write Protect input.The power supply monitor and reset circuit protect memory and system controllers during power up/down and against brownout conditions. Five reset threshold voltages support 5.0 V, 3.3 V and 3.0 V systems. If power supply voltages are out of tolerance reset signals become active, preventing the system microcontroller, ASIC or peripherals from operating. Reset signals become inactive typically 200 ms after the supply voltage exceeds the reset threshold level. With both active high and low reset signals, interface to microcontrollers and other ICs is simple. In addition, the RESET pin or a separate input, MR, can be used as an input for push-button manual reset capability.The CAT1024 memory features a 16-byte page. In addition, hardware data protection is provided by a VCC sense circuit that prevents writes to memory whenever VCC falls below the reset threshold or until VCC reaches the reset threshold during power up.Available packages include an 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN and 8-pin MSOP. The TDFN package thickness is 0.8 mm maximum. TDFN footprint is 3 x 3 mm.

特性 Features

• Precision power supply voltage monitor5.0 V, 3.3 V and 3.0 V systemsFive threshold voltage options
• Active high or low reset — Valid reset guaranteed at VCC = 1V
• 400 kHz I²C bus
• 3.0 V to 5.5 V operation
• Low power CMOS technology
• 16-Byte page write buffer
• Built-in inadvertent write protection
• 1,000,000 Program/Erase cycles
• Manual reset input
• 100 year data retention
• 8-pin DIP, SOIC, TSSOP, MSOP & TDFN (3x3mm foot print) packages
• Industrial and extended temperature ranges

应用 Application

• Industrial control
• Medical systems
• Printers
• Mass storage

简介

CAT1024属于集成电路（IC）的监控器。由制造生产的CAT1024监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。