Advance Information

Features

• Fully compatible to standard 8051 microcontroller

• Superset of the 8051 architecture with 8 datapointers

• Up to 20 MHz operating frequency

– 375 ns instruction cycle time @16 MHz

– 300 ns instruction cycle time @20 MHz (50 duty cycle)

• On-chip program memory (with optional memory protection)

– C505(C)(A)-2R : 16K byte on-chip ROM

– C505A-4R/C505CA-4R: 32K byte on-chip ROM

– C505A-4E/C505CA-4E: 32K byte on-chip OTP

– alternatively up to 64k byte external program memory

• 256 byte on-chip RAM

• On-chip XRAM

– C505/C505C : 256 byte

– C505A/C505CA : 1K byte

• 32 + 2 digital I/O lines

– Four 8-bit digital I/O ports

– One 2-bit digital I/O port (port 4)

– Port 1 with mixed analog/digital I/O capability

• Three 16-bit timers/counters

– Timer 0 / 1 (C501 compatible)

– Timer 2 with 4 channels for 16-bit capture/compare operation

• Full duplex serial interface with programmable baudrate generator (USART)

• Full CAN Module, version 2.0 B compliant (C505C and C505CA only)

– 256 register/data bytes located in external data memory area

– 1 MBaud CAN baudrate when operating frequency is equal to or above 8 MHz

– internal CAN clock prescaler when input frequency is over 10 MHz

• On-chip A/D Converter

– up to 8 analog inputs

– C505/C505C : 8-bit resolution

– C505A/C505CA: 10-bit resolution

• Twelve interrupt sources with four priority levels

• On-chip emulation support logic (Enhanced Hooks Technology TM)

• Programmable 15-bit watchdog timer

• Oscillator watchdog

• Fast power on reset

• Power Saving Modes

– Slow-down mode

– Idle mode (can be combined with slow-down mode)

– Software power-down mode with wake up capability through P3.2/INT0 or P4.1/RXDC pin

• P-MQFP-44 package

• Pin configuration is compatible to C501, C504, C511/C513-family

• Temperature ranges:

SAB-C505 versions TA = 0 to 70 °C

SAF-C505 versions TA = -40 to 85°C

SAH-C505 versions TA = -40 to 110°C

SAK-C505 versions TA = -40 to 125°C

C505CA属于集成电路（IC） > 微控制器。英飞凌科技公司制造生产的C505CA微控制器微控制器产品是相对复杂的用户可编程数字逻辑器件。这些产品与视为微控制器的器件密切相关，两者之间的区别主要体现在制造商选择的用词。不过按照传统，微控制器集成了工作存储器，也更可能包含混合信号外设，并且往往与更简单的软件范例结合使用，旨在重复执行一系列预定义的任务。