C1608X5R1E106M080AC电容器的陶瓷电容器规格书PDF中文资料

Eval-M3-CM615PN is an evaluation board for motor drive applications with single phase PFC integrated 3 phase

IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon’s motion

control IC and IPM technology for motor drives with single phase PFC.

Main features of CIPOS™ Mini IPM IFCM15P60GD are:

• 3 half bridges with TRENCHSTOP™ IGBT3 15A/600V and antiparallel diodes for inverter section

• 30A/650V TRENCHSTOP™ 5 IGBT and rapid switching emitter controlled diode for PFC section

• Lead-free terminal plating; RoHS compliant

• Very low thermal resistance due to DCB

• Rugged SOI gate driver technology with stability against transient and negative voltage

• Negative potential allowed up to VS =-11V for single transmission at VBS=15V

• Integrated bootstrap functionality

• Overcurrent shutdown

• Temperature monitor

• Undervoltage lockout at all channels

• Low side common emitter

• Cross conduction prevention

• All six switches turn off during protection

The evaluation board characteristics are:

• Input voltage 160~265VAC

• Maximum 650W motor power output

• Power Factor Correction

• On board EMI filter

• Current sensing with single shunt

• Auxiliary power supply with 15V, 3.3V

• Overcurrent protection

• Overtemperature hardware protection

• Sensing of DC-link voltage

• Thermistor output

• Fault diagnostic output

• Measurement test-points compatible to standard oscilloscope probes

• PCB is 120 mm × 120 mm and has two layers with 35μm copper each

• RoHS compliant