C1210C225K5RAC电容器的陶瓷电容器规格书PDF中文资料

C1210C225K5RAC属于电容器的陶瓷电容器。由基美公司制造生产的C1210C225K5RAC陶瓷电容器电容器是存储电荷的无源电子器件。陶瓷电容器包括两个或更多个交替的陶瓷材料层（作为电介质）和金属层（用作非极化电极）。应用范围包括汽车、旁路、去耦、滤波、射频、ESD 保护。通孔版本通常为圆片或液滴形状，带有两条引线。

Electrical Parameters

As detailed in the KEMET Surface Mount Catalog F3102 for X7R,with the following specific requirements based on room temperature (25°C) parameters:

· Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to the ± 15 over that range.

· Insulating Resistance (IR) measured after 2 minutes at rated voltage @25°C: Limit is 500 megohm microfarads or 10,000MW, whichever of the two is smaller.

· Capacitance and Dissipation Factor (DF) are measured under the following conditions:

1kHz and 1 Vrms if capacitance * 10µF

120Hz and 0.5 Vrms if capacitance $ 10µF

· DF limits:

50 -200 Volts ü 2.5

16 -25 Volts ü 3.5

6.3 / 10 Volts ü 5.0

Soldering Process

All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. The recommended mounting techniques are as follows:

· 0402 / 1210 case sizes ü Solder Reflow

· 0603 / 0805 / 1206 case sizes ü Solder Wave / Solder Reflow