1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is

文件：187.18 Kbytes 页数：17 Pages

ROHM

罗姆

1k, 2k, 4k, bit EEPROMs for direct connection to serial ports

Application General-Purpose Features BR9010-W / F-W / FV-W / RFV-W / RFVM-W (1k bit) : 64 words×16bit BR9020-W / F-W / FV-W / RFV-W / RFVM-W (2k bit) : 128words×16bit BR9040-W / F-W / FV-W / RFV-W / RFVM-W (4k bit) : 256words×16bit Single power supply. Serial data I/O. Self-timed program

文件：277.37 Kbytes 页数：15 Pages

ROHM

罗姆

1, 2, and 4k bit EEPROMs for direct connection to serial ports

ROHM

罗姆

Engine Knock Signal Processor

The HIP9010 is used to provide a method of detecting premature detonation or “Knock” in automotive engines. A block diagram of this IC is shown in Figure 1. The chip alternately selects one of the two sensors mounted on the engine block. Two programmable bandpass filters process the signal from b

文件：81.91 Kbytes 页数：12 Pages

INTERSIL

Engine Knock Signal Processor

The HIP9010 is used to provide a method of detecting premature detonation or “Knock” in automotive engines. A block diagram of this IC is shown in Figure 1. The chip alternately selects one of the two sensors mounted on the engine block. Two programmable bandpass filters process the signal from b

文件：81.91 Kbytes 页数：12 Pages

INTERSIL

SC70, 5ns, Low-Power, Single-Supply, Precision TTL Comparators

General Description The MAX9010/MAX9011/MAX9013 single and MAX9012 dual, high-speed comparators operate from a single 4.5V to 5.5V power supply and feature low-current consumption. They have precision differential inputs and TTL outputs. They feature short propagation delay (5ns, typ), low-supp

文件：330.45 Kbytes 页数：12 Pages

MAXIM

美信