BQ29700DSET集成电路（IC）的电池管理规格书PDF中文资料

BQ29700DSET属于集成电路（IC）的电池管理。由德州仪器制造生产的BQ29700DSET电池管理电池管理 PMIC（电源管理集成电路）系列产品可用于电池相关的监测和控制功能，包括身份验证、电池平衡、状态监测、电量计量、电源选择、短路保护、过压和欠压保护等等。请注意，虽然该系列中的某些产品可能包括电池充电功能，但将充电功能作为主要功能的产品是单独分类的。

1 Features

• Input voltage range pack+: VSS – 0.3V to 12V

• FET drive:

– CHG and DSG FET drive output

• Voltage sensing across external FETs for

overcurrent protection (OCP) is within ±5mV

(typical)

• Fault detection

– Overcharge detection (OVP)

– Over-discharge detection (UVP)

– Charge overcurrent detection (OCC)

– Discharge overcurrent detection (OCD)

– Load short-circuit detection (SCP)

• Zero voltage charging for depleted battery

• Factory programmed fault protection thresholds

– Fault detection voltage thresholds

– Fault trigger timers

– Fault recovery timers

• Modes of operation without battery charger

enabled

– NORMAL mode ICC = 4μA

– Shutdown Iq = 100nA

• Operating temperature range TA = –40°C to +85°C

• Package:

– 6-pin DSE (1.50mm × 1.50mm × 0.75mm)

2 Applications

• Tablet PCs

• Mobile handsets

• Handheld data terminals

3 Description

The BQ2970 battery cell protection device provides

an accurate monitor and trigger threshold for

overcurrent protection during high discharge/charge

current operation or battery overcharge conditions.

The BQ2970 device provides the protection functions

for Li-ion/Li-polymer cells, and monitors across the

external power FETs for protection due to high

charge or discharge currents. In addition, there is

overcharge and depleted battery monitoring and

protection. These features are implemented with low

current consumption in NORMAL mode operation.