BQ25730中文资料具有电源路径和 USB-C™ PD OTG 的 I2C 1 至 5 节电池 NVDC 降压/升压电池充电控制器数据手册TI规格书

描述 Description

The BQ25730 is a synchronous NVDC buck-boost battery charge controller to charge a 1- to 5-cell battery from a wide range of input sources including USB adapter, high voltage USB-C Power Delivery (PD) sources, and traditional adapters. It offers a low component count, high efficiency solution for space constrained, 1- to 5-cell battery charging applications. The Narrow VDC buck-boost architecture avoid direct power path from input source to system voltage which implements wide input voltage range and narrow system voltage range at same time. Narrow system voltage range is valuable for faster battery supplement and lower MOSFET rating for next stage converter.

The NVDC configuration allows the system to be regulated based on battery voltage, but not drop below system minimum voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery goes into supplement mode and prevents the system from crashing.

During power up, the charger sets the converter to a buck, boost, or buck-boost configuration based on the input source and battery conditions. The charger seamlessly transitions between the buck, boost, and buck-boost operation modes without host control.

In the absence of an input source, the BQ25730 supports the USB On-the-Go (OTG) function from a 1- to 5-cell battery to generate an adjustable 3-V to 24-V output on VBUS with 8-mV resolution. The OTG output voltage transition slew rate can be configured to comply with the USB-PD 3.0 PPS specification.

The latest version of the USB-C PD specification includes Fast Role Swap (FRS) to ensure power role swapping occurs in a timely fashion so that the device(s) connected to the dock can avoid experiencing momentary power loss or glitching. This device integrates FRS in compliance with the PD specification.

TI patented switching frequency dithering pattern can significantly reduce EMI noise over the whole conductive EMI frequency range (150 kHz ~ 30 MHz). Multiple dithering scale options are available to provide flexibility for different applications to simplify EMI noise filter design.

The charger can be operated in the TI patented pass through (PTM) mode to improve efficiency over the full load range. In PTM, input power is directly passed through the charger to the system. Switching losses of the MOSFETs and inductor core loss can be saved for high efficiency operation.

The BQ25730 is available in a 32-pin 4mm × 4mm WQFN package.

特性 Features

• Power path control through battery MOSFET implementing independent system voltage instant-on with no battery or depleted battery
• Buck-boost narrow voltage DC (NVDC) charger for USB-C Power Delivery (PD) interface platform
• Charge current up to 16.2 A/8.1 A with 128-mA/64-mA resolution based on 5-mΩ/10-mΩ sensing resistor
• Support USB 2.0, USB 3.0, USB 3.1 and USB power delivery input current setting
• Seamless transition between buck, buck-boost, and boost operations
• TI patented switching frequency dithering pattern for EMI noise reduction
• Input and battery current monitor through dedicated pins
• Battery supplements system when adapter is fully loaded
• Power up USB port from battery (USB OTG)
• Output current limit up to 12.7 A/6.35 A with 100-mA/50-mA resolution based on 5-mΩ/10-mΩ sensing resistor
• I2C host control interface for flexible system configuration
• ±0.5% Charge voltage regulation
• ±2.5% Input current regulation
• Safety
• Input, system, battery overvoltage protection
• Package: 32-Pin 4.0 mm × 4.0 mm WQFN