BL4054B中文资料锂电池充电芯片：10V,0.8A,线性充电,单节数据手册Belling规格书

描述 Description

The BL4054/BL4054B is a complete constant current / constant voltage linear charger for single cell Lithium-Ion batteries. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The BL4054/BL4054B automatical -ly terminates the charge cycle when the charge current drops to 1/10 the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the BL4054/BL4054B automatically enters a low current state, dropping the battery drain current to less than 2mA. The BL4054/BL4054B can be put into shutdown mode, reducing the supply current to 25mA. Other features include charge current monitor, under-voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.

特性 Features

• Programmable Charge Current Up to 800mA
• No MOSFET, Sense Resistor or Blocking Diode Required
• Preset 4.2V Charge Voltage with ±1% Accuracy
• Charge Current Monitor Output for Gas Gauging
• Thermal Regulation Maximizes Charge Rate Without Risk of Overheating
• Charges Single Cell Li-Ion Batteries Directly from USB Port
• Over-Voltage Protect
• Automatic Recharge
• Charge Status Output Pin
• C/10 Charge Termination
• 25mA Supply Current in Shutdown
• 2.9V Trickle Charge Threshold
• Soft-Start Limits Inrush Current
• Available in 5-Lead SOT-23 and TSOT23-5 Package