标准电压检测器

罗姆的标准型CMOS复位IC系列是高精度、低消耗电流的RESET IC系列。\n\n为保证客户可根据应用进行选择，备有输出形式为Nch漏极开路和CMOS输出的2种产品，检测电压为2.3V～6.0V的0.1V阶跃 • High accuracy detection\n• Ultra-low current consumption\n• Two output types (N-ch open drain and CMOS output)\n• Wide Operating temperature range\n• Very small and low height package\n• Package SSOP5 is similar to SOT-23-5(JEDEC);

ROHM

罗姆

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：507.55 Kbytes 页数：18 Pages

ROHM

罗姆

Standard CMOS Standard CMOS

文件：507.55 Kbytes 页数：18 Pages

ROHM

罗姆

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：507.55 Kbytes 页数：18 Pages

ROHM

罗姆