BC9824中文资料Low Power High Performance 2.4GHz GFSK Transceiver数据手册Holtek规格书

描述 Description

BC9824 is a GFSK transceiver operating in the world wide ISM frequency band at 2400~2483.5 MHz. Burst mode transmission and up to 2Mbps air data rate make them suitable for applications requiring ultra low power consumption. The embedded packet processing engines enable their full operation with a very simple MCU as a radio system. Auto re-transmission and auto acknowledge give reliable link without any MCU interference.

BC9824 operates in TDD mode, either as a transmitter or as a receiver.

The RF channel frequency determines the center of the channel used by BC9824. The frequency is set by the RF_CH register in register bank 0 according to the following formula: F0= 2400 + RF_CH (MHz). The resolution of the RF channel frequency is 1MHz.

A transmitter and a receiver must be programmed with the same RF channel frequency to be able to communicate with each other.

The output power of BC9824 is set by the RF_PWR bits in the RF_SETUP register.

Demodulation is done with embedded data slicer and bit recovery logic. The air data rate can be programmed to 250Kbps, 1Mbps or 2Mbps by RF_DR_HIGH and RF_DR_LOW register. A transmitter and a receiver must be programmed with the same setting.

In the following chapters, all registers are in register bank 0 except with explicit claim.

 

特性 Features

• 2400-2483.5MHz ISM band operation
• Support 250Kbps,1Mbps and 2Mbps air data rate
• Programmable output power
• Low power consumption
• Tolerate ± 60ppm 16MHz crystal
• Variable payload length from 1 to 32bytes
• Automatic packet processing
• 6 data pipes for 1:6 star networks
• 1.9V to 3.6V power supply
• 4-pin SPI interface with maximum 8MHz clock rate
• 20-pin QFN package