1 Features

• Four channels of transmitter and receiver with serial data

transfer rates of 2.488-3.1875Gbps/channel with full rate

and half-rate operations

• Up to 12.75Gbps data rate at full duplex

• User-controlled dual-speed operation (per channel) 2.488-

3.1875Gbps or 1.244-1.59Gbps

• IEEE 802.3ae-2002 10 GE and 10 GFC compliant

- XAUI, XGMII, and MDC/MDIO interfaces

• XGMII format 10-bit parallel input/output data

- Supports HSTL 1.8V and 2.5V SSTL_2

• Extensive configuration via 802.3-compliant MDC/MDIO

serial interface

• 8bit/10bit Encoding/Decoding per channel with selectable

parallel input/output data sizes

- Support optional 8b/10b encoder/decoder bypass

operation

• Integrated Equalization and Pre-emphasis

• De-skewing and channel-to-channel alignment options

• Low power, 250mW per channel typical

• Meets jitter requirements with significant margin

• Comma detection and synchronization, byte alignment

• Tx/Rx rate matching via IDLE insertion/deletion

• Receive signal detect and 16 levels of transmission

medium equalization

• CML transmit outputs with four levels of pre-emphasis

• Loopback

- Per-channel serial Tx-to-Rx and Rx-to-Tx parallel

internal loopback modes

• Single-ended/differential input Reference clock

• Double Data-Rate (DDR) mode, also optional SDR (Single

Data Rate) on transmitter

• Support both source-centered and source-simultaneous

clocking

• Long Run Length (512 bit) frequency lock ideal for

proprietary encoding schemes Transmit byte clock

schemes

- One Transmit Byte Clock (TBC) for each channel, or

one TBC for all four channels

• Received clock schemes

- Receive data aligned to local reference clock, to

recovered clock for each channel, or to recovered clock

for Channel A only

• Supports Built-In Self Test (BIST) and IEEE 1149.1 JTAG

• On-chip 25 series output terminations (XGMII side)

• Standard 0.18μm 1.8V CMOS technology

• 3.3V tolerant I/O

BBT3420-SN属于集成电路（IC） > 驱动器，接收器，收发器。瑞萨科技有限公司制造生产的BBT3420-SN驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。