BAV20WS-TP分立半导体产品的二极管-整流器-单规格书PDF中文资料

EVAL-M3-IM564 is an evaluation board for motor drive applications with single-phase, integrated PFC and 3-

phase IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon’s

motion control IC and IPM technology for motor drives with single-phase PFC.

Main features of CIPOS™ Mini IPM IM564-X6D/IM564-X6DS include:

• 3 half bridges with TRENCHSTOP™ 20 A/600 V and antiparallel diodes for inverter section

• 20 A/600 V CoolMOS™ power MOSFETs and rapid switching emitter-controlled diodes for PFC section

• Lead-free terminal plating; RoHS compliant

• Very low thermal resistance due to DCB

• Rugged SOI gate driver technology with stability against transient and negative voltage

• Negative potential allowed up to VS =-11 V for single transmission at VBS=15 V

• Integrated bootstrap functionality

• Overcurrent shutdown

• Temperature monitor

• Undervoltage lockout at all channels

• Low side common emitter

• Cross conduction prevention

• All six switches turn off during protection

The evaluation board characteristics include:

• Input voltage 165~265 VAC

• Maximum 2800 W motor power output

• Power factor correction

• On board EMI filter

• Current sensing with single shunt

• Auxiliary power supply with 15 V, 3.3 V

• Overcurrent protection

• Overtemperature hardware protection

• Sensing of DC-link voltage

• Thermistor output

• Fault diagnostic output

• Measurement test points compatible with standard oscilloscope probes

• PCB is 148 mm × 165 mm and has two layers with 35 μm copper each

• RoHS compliant