LED level meter driver, 5-point,linear scale

Applications Signal meters, tuning meters and voltage checkers. Features 1) Drives an LED bar display in proportion to the input level. 2) The output current can be set to a maximum of 15mA using external resistors, allowing free selection of the type and color of the LEDs. 3) The input

文件：59.6 Kbytes 页数：3 Pages

ROHM

罗姆

Reversible motor driver

文件：72.06 Kbytes 页数：2 Pages

ROHM

罗姆

Voltage controlled operational amplifier

The BA6110FS is a low-noise, low-offset programmable operational amplifier. Offering superb linearity over a broad range, this IC is designed so that the forward direction conductivity (gm) can be changed, making it ideal for applications such as voltage control amplifiers (VCA), voltage control f

文件：118.86 Kbytes 页数：7 Pages

ROHM

罗姆

Voltage controlled operational amplifier

The BA6110FS is a low-noise, low-offset programmable operational amplifier. Offering superb linearity over a broad range, this IC is designed so that the forward direction conductivity (gm) can be changed, making it ideal for applications such as voltage control amplifiers (VCA), voltage control f

文件：118.86 Kbytes 页数：7 Pages

ROHM

罗姆

5-channel high current driver

The BA612 is a high-current driver IC, and contains an array of five Darlington transistors, each with input resistance. Input and output can be directed in the same direction using DIP Pin 14, with the layout optimized to facilitate mounting. Features 1) 5-circuit Darlington transistor array.

文件：53.04 Kbytes 页数：4 Pages

ROHM

罗姆

BA6122A

2-Output Switching Regulator

文件：139.55 Kbytes 页数：2 Pages

ROHM

罗姆

BA6122A

2-Output Switching Regulator

文件：139.55 Kbytes 页数：2 Pages

ROHM

罗姆

LED level meter driver, 5-point, VU scale

LED level meter driver, 5-point, VU scale

文件：91.87 Kbytes 页数：3 Pages

ROHM

罗姆

LED level meter driver, 5-point, VU scale

LED level meter driver, 5-point, VU scale

文件：91.87 Kbytes 页数：3 Pages

ROHM

罗姆

Reset IC with battery backup function

The BA6129AF, BA6162, and BA6162F are reset ICs with a battery backup function, designed for equipment using SRAMs and other similar components. These ICs are configured of a reset signal and CS signal output unit and a power supply switching unit. Features 1) Equipped with battery backup functi

文件：108.21 Kbytes 页数：9 Pages

ROHM

罗姆