AZKN1040T集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

AZKN1040T属于集成电路（IC）的驱动器接收器收发器。由晶焱科技股份有限公司制造生产的AZKN1040T驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Features

 ISO 11898-2:2016 and SAE J2284-1 to SAE

J2284-5 compliant for 2Mbps and 5Mbps CAN FD

with basic wake-up implementation

 Fault voltage up to ±70V for bus pins, suitable for

12V, 24V and 36V systems

 Integrated ESD and Surge Transient Voltage

Suppressor (TVS) for bus pins

 TVS protection Immunities for bus terminals :

±12kV IEC 61000-4-2, Contact Discharge

±15kV IEC 61000-4-2, Air Discharge

±100V IEC 61000-4-5, Surge (8/20s, 2)

 HBM ±6kV ESD protection for all pins

 MM ±400V ESD protection for all pins

 High CDM protection up to ±800V for all pins

 Latch up immunity up to ±400mA for all pins.

 IEC 61000-4-4 Electrical Fast Transient (EFT)

coupling immunity up to ±2kV for bus pins under

communication

 Capability for both low ElectroMagnetic Emission

(EME) and high ElectroMagnetic Immunity (EMI)

 Low standby current (13uA, typical) for power

saving

 Wide range digital inputs allow for direct interfacing

with 3.3V to 5.0V microcontrollers, provided the

microcontroller I/Os are 5 V tolerant.

 Ideal passive behavior to CAN bus with supply

power off

 Transmit Data (TXD) dominant time-out function

 SPLIT voltage output to stabilize the common

mode voltage on the bus

 Bus-dominant time-out function in standby mode

 Undervoltage detection on the pin of VCC power

 Current-limitation and thermal shutdown for the

driver design

Applications

 Industrial Control and Instrumentation Networks

 Motor Control

 Building Automation

 Security Systems

 Medical Equipments

 Battery Control

Description

AZKN1040T is a ±12kV IEC 61000-4-2 protected

Controller Area Network (CAN) transceiver IC. It

serves as an interface between a CAN protocol

controller (MCU) and the physical two-wire CAN bus.

This device operates at 5V power supply and is fully

compliant with ISO 11898-2:2016 standard for CAN

FD application. The data rate of both driver and

receiver is up to 5Mbps to support the high-speed

application of the CAN FD.

AZKN1040T has the capabilities of both the ±40V

common mode range of the receiver and the low EME

of the transmitter, which has been patented as the

Amazing's intellectual property. Moreover, the

whole-chip design of the AZKN1040T can sustain

±2kV EFT coupling under communication.

AZKN1040T is a robust CAN transceiver, which

features ±70V fault protection to sustain the DC short

voltage on the bus pins. Moreover, AZKN1040T has

±100V surge protection immunity to avoid the possible

damage from the EOS events. In addition, the

whole-chip ESD protection immunity of AZKN1040T

can sustain HBM ±6kV, MM ±400V and CDM ±800V,

which is satisfied to overcome the ESD zapping under

the worst manufacture environment.