AZC199-04S.R7G中文资料晶焱科技数据手册PDF规格书

特性 Features

ESD Protect for 4 high-speed I/O lines and one

VDD line

Provide ESD protection for each line to

IEC 61000-4-2,(ESD) ±27kV (air), ±16kV (contact)

IEC 61000-4-4 (EFT) Level-3, 55A (5/50ns)

IEC 61000-4-5 (Lightning) 6A (8/20μs)

For low operating voltage applications: 5V, 4.2V,

3.3V, 2.5V etc.

Low capacitance : 1.0pF typical

Fast turn-on and Low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS diode

Solid-state silicon-avalanche and active circuit

triggering technology

Back-drive protection for power-down mode

Lead-free version available

Green part

Applications

Video Graphics Cards

Digital Visual Interface (DVI)

USB2.0 Power and Data lines protection

Notebook and PC Computers

Monitors and Flat Panel Displays

描述 Description

AZC199-04S is a design which includes ESD

rated diode arrays to protect high speed data

interfaces. The AZC199-04S has been specifically

designed to protect sensitive components which

are connected to data and transmission lines from

over-voltage caused by Electrostatic Discharging

(ESD).

AZC199-04S is a unique design which includes

ESD rated, low capacitance steering diodes and a

unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct the

transient to either the power supply line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the power

line, protecting any downstream components.

Besides, there is a back-drive protection design in

AZC199-04S for power-down mode operation.

AZC199-04S may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).

One AZC199-04S can be used to replace 4

BAV99 devices in a 5V application or a lower

than 5V application.