Features

ESD Protect for 1 Line with Bi-directional

Provide ESD protection for the protected line to

IEC 61000-4-2 (ESD) ±30kV (air/contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 8.5A (8/20μs)

Cable Discharge Event (CDE)

0402 small DFN package saves board space

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

For low operating voltage applications: 5V

maximum

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

Mobile Phones

Hand Held Portable Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection

Description

AZ5525-01F is a design which includes one

Bi-directional surge rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic systems. The

AZ5525-01F has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ5525-01F is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the power

line or control/data lines, protecting any

downstream components.

AZ5525-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).