AZ522S-01F电路保护的TVS-二极管规格书PDF中文资料

AZ522S-01F属于电路保护的TVS-二极管。由晶焱科技股份有限公司制造生产的AZ522S-01FTVS - 二极管TVS 二极管是一种半导体器件，可用于限制或阻止特定电压电平的浪涌。该系列产品使用二极管（只能单向导电的元器件）进行设计。TVS 是 Transient Voltage Suppression/Suppressor（瞬态电压抑制/抑制器）的首字母缩写。类型包括转向（轨至轨）或齐纳，具有单向通道、双向通道、电压 – 反关态、电压 – 击穿、电压 – 箝位、电流 – 峰值脉冲、功率 – 峰值脉冲和电源线路保护等特征。

特性 Features

ESD protection for one line with bi-direction

Provide transient protection for the protected

line to

IEC 61000-4-2 (ESD) ±15kV (air) / ±12kV (contact)

IEC 61000-4-5 (Lightning) 6.5A (8/20μs)

Ultra-low capacitance: 0.2pF typical

For low operating voltage applications: 2.0V

and below

0402 small DFN package saves board space

Fast turn-on and low clamping voltage

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

2.5G/5G/10GbE

Thunderbolt interface

USB3.1 and USB3.0 interfaces

USB Type-C interface

DisplayPort interface

Hand held portable applications

描述 Description

AZ522S-01F is a design which includes a

bi-directional ESD rated clamping cell to protect

high-speed data interfaces in an electronic

system. The AZ522S-01F has been specifically

designed to protect sensitive components which

are connected to data and transmission lines

from over-voltage caused by Electrostatic

Discharging (ESD), Lightning, and Cable

Discharge Event (CDE).

AZ522S-01F is a unique design which includes

proprietary clamping cell with ultra-low

capacitance in a small package. During transient

conditions, the proprietary clamping cell prevents

over-voltage on the control lines, or data lines,

protecting any downstream components.

AZ522S-01F is bi-directional and may be used

on lines where the signal swings above and

below ground.

AZ522S-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).