AZ5013-01H电路保护的TVS-二极管规格书PDF中文资料

AZ5013-01H属于电路保护的TVS-二极管。由晶焱科技股份有限公司制造生产的AZ5013-01HTVS - 二极管TVS 二极管是一种半导体器件，可用于限制或阻止特定电压电平的浪涌。该系列产品使用二极管（只能单向导电的元器件）进行设计。TVS 是 Transient Voltage Suppression/Suppressor（瞬态电压抑制/抑制器）的首字母缩写。类型包括转向（轨至轨）或齐纳，具有单向通道、双向通道、电压 – 反关态、电压 – 击穿、电压 – 箝位、电流 – 峰值脉冲、功率 – 峰值脉冲和电源线路保护等特征。

特性 Features

ESD Protect for 1 Line with Uni-directional

Provide ESD protection for the protected line to

IEC 61000-4-2 (ESD) ±30kV (air/contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 4A (8/20μs)

Cable Discharge Event (CDE)

Ultra-small SOD-523 package saves board

space

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

For low operating voltage applications: 3.3V

maximum

Solid-state silicon-avalanche and active circuit

triggering technology

Green Part

Applications

Hand Held Portable Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection

描述 Description

AZ5013-01H is a design which includes a

unidirectional surge rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic systems. The

AZ5013-01H has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ5013-01H is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the power

line or control/data lines, protecting any

downstream components.

AZ5013-01H may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge)