Features

ESD Protect for 1 Line with Uni-directional.

Provide ESD protection for the protected line to

IEC 61000-4-2 (ESD) ±25kV (air), ±15kV (contact)

IEC 61000-4-4 (EFT) 40A (5/50ns)

IEC 61000-4-5 (Lightning) 8.5A (8/20μs)

Cable Discharge Event (CDE)

Ultra-small SOD-323 package saves board

space.

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

Low operating voltage: 5V

Solid-state silicon-avalanche and active circuit

triggering technology.

Green part available

Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection

Description

AZ2215-01L is a design which includes a

unidirectional surge rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic systems. The

AZ2215-01L has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage and latch-up caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ2215-01L is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the power

line or control/data lines, protecting any

downstream components.

AZ2215-01L may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge)