AZ101S-02F.R7G中文资料晶焱科技数据手册PDF规格书

Features

ESD protect for two high-speed I/O channels

Provide transient protection for each channel to

IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC 61000-4-5 (Lightning) 2.5A (8/20μs)

Ultra-low capacitance: 0.18pF typical

For operating voltage of 1.5V and below

Fast turn-on and ultra-low clamping voltage

Array of ESD rated diodes with internal

equivalent TVS diode

Solid-state silicon-avalanche and active circuit

triggering technology

Simplified layout for high-speed differential

signaling channels

Green part

Applications

Thunderbolt interface

USB3.1 and USB3.0 interfaces

USB Type-C interface

DisplayPort interface

SATA and eSATA interface

V-By-One interface

Consumer electronics

Description

AZ101S-02F is a design which includes ESD

rated diode arrays to protect high-speed data

interfaces. The AZ101S-02F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD).

AZ101S-02F is a unique design which includes

ESD rated, ultra-low capacitance steering diodes

and a unique design of clamping cell which is an

equivalent TVS diode in a single package. During

transient conditions, the steering diodes direct

the transient to either the internal ESD line or to

ground line. The internal unique design of

clamping cell prevents over-voltage on the

internal ESD line and on the I/O line, which is

protecting any downstream components.

AZ101S-02F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).