AXP202数据手册power中文资料规格书

描述 Description

AXP202 is designed to be a highly-integrated power system management IC that is optimized for applications requiring single-cell Li-battery (Li- Ion/Polymer) and multiple output DC-DC converters. It is offering an easy-to-use and flexible complete solution which can fully meet the increasingly complexity of accurate power control required by modern application processor system.

 AXP202 comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature as well as 4 configurable GPIOs. To guarantee the safty and stability of power system, AXP202 has integrated various protection circuits such as Over voltage Protection(OVP)/Under voltage Protection(UVP) ,Over temperature protection(OTP),Over current protection(OCP).

With Intelligent Power Select, IPS™ circuits, AXP202 can distribute power safely and transparently among external AC-adapter, Li-battery and loaded application system, and it can still work normally when there is no battery (deeply discharged/infective battery) but only external input power source.

 The AXP202 provides a small, simple solution for obtaining power from three different power sources, single-cell Li-Ion battery, USB port, and AC-adapter, and it can support rechargable backup battery too. To ensure compatibility with a wide range of system processors, AXP202 uses a Two Wire Serial Interface (TWSI),through which application processor is capable of enabling/disabling power rails, programming voltage, visiting internal registers as well as measurement data (including Fuel Gauge). With the power monitoring results of high precision (1%, determined by the 1% BIAS resistance), end users will be always posted with the real-time power consumption, which can bring them an unprecedented experiences of power management.

特性 Features

·Battery Management\r
o Operation Voltage:2.9V~6.3V (AMR：-0.3V~15V)\r
o Configurable Intelligent Power Select system\r
o Current and voltage limit of adaptive USB or AC adapter input\r
o The resistance of internal ideal diode lower than 100mΩ\r
·Full-integrated Charger\r
o Max Charge Current up to 1.8A\r
o Battery temperature monitor\r
o Support USB-Compatible charger\r
o High precision as 0.5%\r
o support 4.1V/4.15V/4.2V/4.36V battery\r
o Charging process control automatically\r
o LED driver to indication the charging status\r
o Auto adjust the charging current according to the system load\r
·Backup Battery\r
o Provide power to RTC module by using the backup battery\r
o Integrated an backup battery charger\r
·2 Synchronous Duck DC-DC\r
o DC-DC1 : PWM Charger\r
o DC-DC2 : 1.6A ,with Voltage from 0.7V to 2.275V and 25mV/step,supporting Voltage Ramp Control(VRC)\r
o DC-DC3 : 1.2A with Voltage from 0.7V to 3.5V and 25mV/step\r
·5 Low-dropout Linear Regulator(LDO)\r
·Signal Capture\r
o built-in 16 channel 12 Bit ADC\r
o 4 external input channels\r
o Built-in high precision coulomb counter and fuel-gauge system\r
o Wealthily power information,such as the real-time power dissipation (mA or mW),\r
remaining battery status(% or mAh)and remaining battery or charging time\r
o Low power warning and protection\r
o Provide temperature information of chip\r
·Host Interface\r
o Host can exchange data with processor by TWSI\r
o Flexibility to configure the interrupt management\r
o Multi-function GPIO can be set to IO,PWM,current sink and other function\r
o Built-in timer\r
o Four registers can be used to save the data when system shutdown\r
·System Management\r
o Soft reset or hardware reset\r
o Support soft shutdown or hardware shutdown, and external wakeup\r
o Monitoring output voltage, self-diagnostic function\r
o PWROK is used for system reset\r
o External power source detect (insert/remove/lack of driving capacity )\r
o Soft start\r
o Over voltage protection /under voltage protection (OVP/UVP)\r
o Over current protection (OCP)\r
o Over temperature protection (OTP)\r
o Support OTG VBUS power state setting/monitoring\r
·Fully Integration\r
o high precision internal Reference Voltage （0.5%）\r
o Built-in MOSFET

应用 Application

·Handhold mobile devices Smart cell phone, PMP/MP4, digital camera, handhold navigation devices GPS, PDA, digital broadcast TV receiver
·MID(Mobile internet device)
·Digital photo Frame，portable DVD player,  UMPC,  and  UMPC-like ，Learning machine
·Application Processor systems
·Otherbatteryandmulti-power applications