AX6605CCA中文资料亚瑟莱特数据手册PDF规格书

 GENERAL DESCRIPTION

The AX6604/5 is a high accurately, low noise, high ripple rejection ratio, low dropout, dual CMOS LDO voltage regulators with enable function. The EN function allows the output of each regulator to be turned off independently, resulting in greatly reduced power consumption.

The AX6604/5 has the soft start function to suppress the inrush current. The current limit is over 250mA per channel and also operates as a short protection for the output current limiter. The output voltage for each regulator is set independently by metal trimming.

The AX6604/5 is fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequency. It is available in the SOT-23-6L package.

 FEATURES

- Input voltage range : 2.5V to 6V

- Varied fixed output voltage combinations

- 150mV Dropout at 100m A output current (VOUT ≥ 2.8V)

- Output current : 20 0mA/channel (typ.)

- Low quiescent current

- Standby Current: 1uA(typ.)

- Current Limit and Short current protections

- Thermal shutdown protection

- Fast transient response

- Low ESR Capacitor Compatible (X7R, X5R)

- Available in the 6-Pin Pb-Free SOT 23 package