AW32901FCR中文资料Over-Voltage Protection Load Switch with Surge Protection数据手册Awinic规格书

描述 Description

The AW329xx family OVP load switch features surge protection, an internal clamp circuit protects the device from surge voltages up to 120V.The AW329xx features an ultra-low 27m (typ.) Rdson nFET load switch. When input voltage exceeds the OVP threshold, the switch is turned off very fast to prevent damage to the protected downstream devices. The ＩＮ pin is capable of withstanding fault voltages up to 29VDC.The default OVP threshold is 5.95V (AW32901), 6.2V (AW32902), 6.8V (AW32905), 9.98V (AW32909), 10.5V (AW32910) and 14V (AW32912), to use default OVP threshold, please NC R1, and R2=0Ω，OVLO must connect to GND. Don’t float. The OVP threshold can be adjusted from 4V to 24V through external OVLO pin.The device features an open-drain output ¯(\"ACOK\" ), when VIN_UVLO < VIN < VIN_OVLO and the switch is on, ¯(\"ACOK\" ) will be driven low to indicate a good power input, otherwise it is high impedance.This device features over-temperature protection that prevents itself from thermal damaging.

特性 Features

• Highly reliable 1.3mm × 1.8mm FCQFN-12 package
• Surge protection
• IEC 61000-4-5: > 120V
• Integrated low Rdson nFET switch: typical 27m
• 5A continuous current capability
• Default Over-Voltage Protection (OVP) threshold
• AW32901: 5.95V
• AW32902: 6.2V
• AW32905: 6.8V
• AW32909: 9.98V
• AW32910: 10.5V
• AW32912: 14V
• OVP threshold adjustable range: 4V to 24V
• Input system ESD protection
• IEC 61000-4-2 Contact discharge: ±8kV
• IEC 61000-4-2 Air gap discharge: ±15kV
• Input maximum voltage rating: 29VDC
• Fast turn-off response: typical 50ns
• Over-Temperature Protection (OTP)
• Under-Voltage Lockout (UVLO)