AVO100-48S28B-6L数据手册电源-板安装的直流转换器规格书PDF

描述 Description

The AVO100-48S28 series isolated DC-DC converter is designed specifically to provide the main 28 Vdc supply for RF power amplifiers in small-cell, low power telecommunications applications.The converter accepts a wide range input of 36 to 75 Vdc and provides a low noise regulated 28 Vdc output that is capable of delivering up to 3.57 amps. Rated at 100 watts, it can operate over an ambient temperature range of -40 to 85˚C, continuing to deliver full power up to a baseplate temperature of 100˚C. The output voltage can be trimmed from 18 to 32.5 Vdc to meet a broad range of application needs and there is no minimum load requirement. The converter uses 280 kHz fixed-frequency switching and complies with the international EN55022 Class A standard for conducted and radiated EMI.Based on a high power density open-frame design that can incorporate an optional thermal baseplate, the AVO100-48S28 series converter has an industry standard eighth-brick footprint and pin-out, with an installed height of just 0.5 inch (12.7 mm). It has a high full load conversion efficiency of 92% and a thermally optimized layout that is suitable for either conduction or forced air cooling. Standard features include differential remote sense and remote On/Off, as well as comprehensive protection against overcurrent, overvoltage and overtemperature conditions.

特性 Features

·-Wide input range
·
·-Optimised for contact cooling
·
·-Low ripple and noise
·
·-Fixed switching frequency
·
·-High capacitive load capability
·
·-Pre-bias start-up capability
·
·-Basic insulation system
·
·-Output voltage remote sense
·
·-Through hole termination
·
·-Open frame or baseplate construction
·